User Guide

Figure 76 Camera module cross section and assembly principle

Figure 77 Camera module bottom view including serial numbering

The camera module as a component is not a repairable part, meaning that the components inside the module

may not be changed. Cleaning dust from the front face is allowed only. Use clean compressed air.

The camera module uses socket type connecting. For versioning, laser marked serial numbering is used on

the PWB.

The main parts of the module are:

• Lens unit including lens aperture.

• Infrared filter; used to prevent infrared light from contaminating the image colors. The IR filter is glued

to the EMI shielded camera body.

• Camera body; made of conductive metallized plastic and attached to the PWB with glue.

• Sensor array including DSP functions is glued and wire-bonded to the PWB.

• PWB, FR-4 type

• Socket type connection

RM-10;RM-24

Camera Module Troubleshooting Nokia Customer Care

Issue 1 COMPANY CONFIDENTIAL Page 8 –11