User Guide

Figure 62 Tx Control window

Next actions

When settings are done, click “Send” to enable them.

If you change the settings (e.g. give a new channel number), you need to click “Stop” and “Send” again.

Checking antenna functionality

The main antenna has two separate antenna elements: GSM and WCDMA.

In the GSM antenna, there is one Feed and two GND contacts.

In the WCDMA antenna, there is one Feed and one GND contact.

The contacts of the GSM antenna are separated in the (RDC = 0 ohm) short-circuit. The contacts of the WCDMA

antenna are in the (RDC = 0 ohm) short-circuit.

Figure 63 RM-10 antenna

RM-10;RM-24

Nokia Customer Care RF Troubleshooting and Manual Tuning Guide

Page 7 –18 COMPANY CONFIDENTIAL Issue 1