User Guide

Figure 61 RF Controls window

• WCDMA troubleshooting

i From the Testing menu, activate the

Tx Control

window:Testing -> WCDMA -> Tx Control .

ii In the

Tx Control

window:

• Select the

Algorithm mode

tab.

• Set Start level to “0” dBm (Default = “0”).

• Set Step size, Step count and Sequence to “0” (Default = “0”).

• Set Scrambling code class to “LONG” (Default = “LONG”).

• Set Scrambling code to “16” (Default = “16”).

• Set DPDCH Code number to “0”, Code class to “2” and Weight to “15” (Defaults).

• Set DPCCH Code number to “0”, Code class to "2" and Weight to “8” (Defaults).

• Set Channel to 9750.

• Check the "DPDCH enabled" checkbox (Default).

RM-10;RM-24

RF Troubleshooting and Manual Tuning Guide Nokia Customer Care

Issue 1 COMPANY CONFIDENTIAL Page 7 –17