User Guide

4. In the

RSSI Reading

window, select the appropriate band and channel.

Figure 59

RSSI Reading

window

5. To start the measurement, activate GSM Rx chain, click Start.

Results

RSSI reading values of the selected band and channel are displayed. The RSSI level must be the same value

which is set at the signal generator (-80 dBm).

WCDMA Rx chain activation for manual measurement

Steps

1. Start

Phoenix

service software.

2. Choose Testing→WCDMA→Rx Control .

3. In the

Rx Control

window:

RM-10;RM-24

RF Troubleshooting and Manual Tuning Guide Nokia Customer Care

Issue 1 COMPANY CONFIDENTIAL Page 7 –13