User Guide

2. Start Phoenix service software and turn the phone to the local mode.

3. 3. From the Testing menu, choose WLAN Configuration, following window should pop up.

4. 4. Turn the power state on and press Scan

5. 5. After few seconds, list of found WLAN networks should be updated if WLAN is working, and at least

station with SSID name default should be found and signal field should show value close to 75 (+/-10).

Figure 43 WLAN configuration

RM-10;RM-24

Nokia Customer Care BB Troubleshooting and Manual Tuning Guide

Page 6 –34 COMPANY CONFIDENTIAL Issue 1