Page CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support (20) Approved 3.0 MGR 02.Mai.2006 CONFIDENTIAL SERVICE MANUAL Level 1&2 RM-10 / RM-24 Transceiver characteristics: Band: RM-10: Tri-band phone for EGSM 900/1800/1900MHz, WCDMA 2000 RM-24: Tri-band phone for EGSM 850/1800/1900MHz, EDGE Camera: Integrated 2.
Page CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support (20) Approved 3.0 MGR 02.Mai.2006 CONFIDENTIAL TABLE OF CONTENTS Page . INTRODUCTION 3 2. GENERAL REPAIR INFORMATION 4 3. PATHFINDER FOR WORKSHOP STAFF 5 4. EXPLODED VIEW AND COMPONENT DISPOSAL 6 5. COMPONENT OVERVIEW 7 6. SPARE PARTS LIST 8 7. SERVICE TOOLS 9 8. SW-UPDATE 11 9. DISASSEMBLY INSTRUCTION 12 0. DOMESHEET EXCHANGE INSTRUCTION 18 . GONOGO TEST 19 2.
Page CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support (20) Approved 3.0 MGR CONFIDENTIAL 02.Mai.2006 . INTRODUCTION The purpose of this document is to help NOKIA service levels 1 and 2 workshop technicians to carry out service to NOKIA products. This Service Manual is to be used only by authorized NOKIA service suppliers, and the content of it is confidential. Please note that NOKIA provides also other guidance documents (e.g.
Page CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support (20) Approved 3.0 MGR CONFIDENTIAL 02.Mai.2006 2. GENERAL REPAIR INFORMATION In this section the technician will get some general hints how to carry out repairs: • • • • • • • • • • • • • • • • • • • • • To familiarize oneself with NOKIA product read the tutorials or user guide on www.nokia.com -->Support--> Phones, by selecting the Phone Model.
Page CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support (20) Approved 3.0 MGR 02.Mai.2006 CONFIDENTIAL 3. PATHFINDER FOR WORKSHOP STAFF In addition to the information in this Service Manual, there are several instructions and information, which have to be followed. Main documentation database is NOKIA Online with the purpose of serving different multimedia content, like video clips or interactive tutorials.
Page CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support (20) Approved 3.0 MGR CONFIDENTIAL 02.Mai.2006 4. EXPLODED VIEW AND COMPONENT DISPOSAL Recommendation for the ecologically friendly disposal of components. Colorized components show the different categories. See corresponding ITEM/CIRCUIT REF in the Spare Parts Service Bulletins on NOL. Service Manual E70 RM-10 / RM-24 Copyright © 2006 NOKIA Corporation. All rights reserved.
Page CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support (20) Approved 3.0 MGR CONFIDENTIAL 02.Mai.2006 5. COMPONENT OVERVIEW Service Manual E70 RM-10 / RM-24 Copyright © 2006 NOKIA Corporation. All rights reserved.
Page CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support (20) Approved 3.0 MGR CONFIDENTIAL 02.Mai.2006 6. SPARE PARTS LIST Please exchange this page (placeholder) with latest corresponding Service Bulletins (spare parts, SWAP units and service tools) from NOL! This will ensure, that you are using up-to-date order codes only. Therefore Service Bulletins have to be checked from NOL on daily basis.
Page CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support (20) Approved 3.0 MGR CONFIDENTIAL 02.Mai.2006 7. SERVICE TOOLS FLS-4S incl. ACF-8, Driver and User Guide Dongle and flash device incorporated into one package, developed specifically for POS use. ACF-8 Universal Power Supply is used to power FLS-4S. Travel Charger ACP-8 Small and lightweight charger for fast charging of your phone battery.
Page 10 (20) CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support Approved 3.0 MGR CONFIDENTIAL 02.Mai.2006 RJ-82 Soldering Jig SS-70 Domesheet Jig Lead-free Solder Wire Mandatory for lead-free products (Level 2 only). 0772040 • • • • • • • • • • • • • • • • • • • • • • Service Manual E70 RM-10 / RM-24 NMP Standard Toolkit NOKIA opening tool SRT-6 NOKIA No. 0770431 Tonichi torque driver NOKIA No.
Page 11 (20) CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support Approved 3.0 MGR CONFIDENTIAL 02.Mai.2006 8. SW-UPDATE Flash Concept – (Point of Sales) To use FLS-4S Flash Dongle you have to follow the user guide inside the sales package. Please check always for the latest version of flash software, which is available on NOKIA Online. Service Manual E70 RM-10 / RM-24 Copyright © 2006 NOKIA Corporation. All rights reserved.
Page 12 (20) CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support Approved 3.0 MGR CONFIDENTIAL 02.Mai.2006 9. DISASSEMBLY INSTRUCTION SS-15 DC Plug Angled tweezers SS-34 Metal tweezers Torque driver Torx Plus® size 6 bit Torx plus® size 6 driver SRT-6 Dental tool SS-93 1. Needed tools. 2. Protect the window with a film. 3. Unlock and remove the BATTERY COVER. 4. Remove the ANTENNA MODULE, beginning from the battery compartment. 5.
Page 13 (20) CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support Approved 3.0 MGR CONFIDENTIAL 9. Cover the LCD MODULE with a protective film. 10. Remove the ENGINE QWERTY KEYMAT. 11. Remove the POWER KEY. 12. Remove the JOYSTICK HAT. 02.Mai.2006 For assembly only! 13. Note the correct position when reassembling the JOYSTICK. 14. The FLIP HINGE is connected with the COAX CABLE to the ENGINE MODULE. 15.
Page 14 (20) CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support Approved 3.0 MGR CONFIDENTIAL 02.Mai.2006 17. Place the SS-93 between the B-COVER edge and the clip of the FLIP MODULE and release it carefully. 18. Carefully, turn over the unit securing the FLIP MODULE. Do not yet separate the parts from each other. 19. Unlock another clip of the FLIP MODULE carefully. 20. Lift the FLIP MODULE a bit and place the flex connector opening tool as shown. 21.
Page 15 (20) CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support Approved 3.0 MGR CONFIDENTIAL 02.Mai.2006 25. Remove the LCD MODULE paying attention to the COAX CABLE. 26. Unlock the T9 COVER in the order shown. 27. Continue on the other side. 28. Pull up the T9 COVER and remove it. 29. Remove the T9 KEYMAT. 30. Open the COAX CABLE connector with angled tweezers. For assembly only! 31. Note the correct position of the COAX CABLE when reassembling 32.
Page 16 (20) CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support Approved 3.0 MGR CONFIDENTIAL 02.Mai.2006 33. Remove the modules from the FLIP FRAME. 34. Separate the FLIP QWERTY KEYMAT from the FLIP PWB ASSEMBLY 35. Unscrew the two Torx Plus size 6 SCREWS in the order shown. For assembly use a reverse order and Torque driver with a torque setting of 21Ncm. 36. Remove the ENGINE MODULE from the B-COVER. 37. Remove the VOICE KEY. 38.
Page 17 (20) CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support Approved 3.0 MGR CONFIDENTIAL 02.Mai.2006 41. Use the A-COVER as a support when removing the CAMERA MODULE. 42. Note the correct position of the SS-15 before placing it over the CAMERA MODULE. 43. Press the SS-15 lightly in shown direction until the CAMERA MODULE have been unlocked. 44. Press the Camera removal tool together. 45. Gently, remove the CAMERA MODULE.
Page 18 (20) CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support Approved 3.0 MGR CONFIDENTIAL 02.Mai.2006 0. DOMESHEET EXCHANGE INSTRUCTION 1. Place the new ENGINE QWERTY DOMESHEET on the SS-70. Align it with the two guide pins and remove the protection foil. 2. Place the 1EM ENGINE MODULE over the SS-70 and align it with the two guide pins. Now press the module on the domesheet and remove the assembly. 3. Place the new FLIP QWERTY DOMESHEET on the SS-70.
Page 19 (20) CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support Approved 3.0 MGR 02.Mai.2006 CONFIDENTIAL . GONOGO TEST To test the Camera, Bluetooth and IRDA functionality refer to the E70 User`s guide. The User´s Guide is available on www.nokia.com. Before starting the GoNoGo test, check that camera window is clean. If not, clean the window with cloth. Bluetooth test You need another Bluetooth device (e.g. 6230) to do a GoNoGo test.
Page 20 (20) CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support Approved 3.0 MGR 02.Mai.2006 CONFIDENTIAL 2. BATTERY TEST A battery tester lets you test the capacity of NOKIA batteries. Please refer to the actual information on NOKIA Online. http://www.astratec.co.uk/ Service Manual E70 RM-10 / RM-24 http://www.cadex.com/ Copyright © 2006 NOKIA Corporation. All rights reserved.
