E66 User Guide 9207000 Issue 2
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-343 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http:// www.nokia.com/phones/declaration_of_conformity/. © 2008 Nokia. All rights reserved. Nokia, Nokia Connecting People, Eseries, E66, and Visual Radio are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation.
Reverse engineering of any software in the Nokia device is prohibited to the extent permitted by applicable law. Insofar as this user guide contains any limitations on Nokia's representations, warranties, damages and liabilities, such limitations shall likewise limit any representations, warranties, damages and liabilities of Nokia's licensors. The availability of particular products and applications and services for these products may vary by region.
Contents Contents Safety.........................................................11 About your device.........................................................11 Network services...........................................................12 Battery removing..........................................................12 E66 in brief.................................................13 Key features...................................................................13 Keys and parts................................
Personalisation..........................................36 Profiles...........................................................................36 Select ringing tones......................................................36 Customise profiles.........................................................37 Personalise the home screen.......................................37 Change the display theme............................................38 Download a theme......................................................
Contents Save stations...............................................................51 Internet radio settings...............................................52 Internet......................................................53 Web................................................................................53 Connection security....................................................53 Browse the web..........................................................53 Bookmarks.......................................
Phone.........................................................79 Voice calls.......................................................................79 Answer a call...............................................................79 Make a call...................................................................79 Make a conference call...............................................80 Video calls......................................................................80 Make a video call............................
Contents Landmarks.....................................................................97 Create a landmark......................................................97 Edit landmarks............................................................97 Landmark categories.................................................97 Receive landmarks.....................................................98 Nokia Office Tools......................................99 Active notes.....................................................
Settings....................................................125 General settings..........................................................125 Personalisation settings..........................................125 Display settings.....................................................125 Standby mode settings.........................................126 Tone settings.........................................................126 Language settings.................................................
Contents What if your battery is not authentic?...................147 Care and maintenance.............................149 Disposal........................................................................150 Additional safety information.................151 Small children..............................................................151 Operating environment..............................................151 Medical devices...........................................................
Safety Safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance. SWITCH OFF IN RESTRICTED AREAS Follow any restrictions.
Safety and other security software on your device and any connected computer. Your device may have preinstalled bookmarks and links for third-party internet sites. You may also access other third-party sites through your device. Third-party sites are not affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose to access such sites, you should take precautions for security or content.
Model number: Nokia E66-1 (RM-343). Hereinafter referred to as Nokia E66. Access your e-mail while on the move. Key features Stay up-to-date and plan your meetings with Calendar. Your new Eseries device helps you manage your business and personal information in and out of office. Some of the key features are highlighted here: E66 in brief E66 in brief Manage your business partners and free time friends with the new Contacts application. Switch from business to personal mode.
E66 in brief 14 Keys and parts 1 — Power key 2 — Earpiece 3 — Light sensor 4 — Selection key. Press the selection key to perform the function shown above it on the display. 5 — Call key 6 — Press the key for a few seconds to switch on Bluetooth connectivity. When writing text, press the key and select More symbols to access special characters. 7 — Microphone 8 — Camera (video calls only) 9 — Navi™ scroll key, hereafter referred to as the scroll key.
1 — Home key 2 — Contacts key 3 — Calendar key 4 — E-mail key Key moves Your device rotates the display automatically when you move it and responds to tapping and turning. Scroll key lights notify you of events, and the slide enables answering and ending calls and locking the keypad. Automatic display rotation In all applications, the screen rotates automatically from portrait to landscape when you turn the device to the left.
E66 in brief Scroll key lights When you receive a message or miss a call, the scroll key starts blinking to indicate the event. When the display light turns off, the scroll key starts blinking slowly. To set the length of time for blinking for missed events or to select of which events you want to be notified, select Menu > Tools > Settings > General > Personalisation > Notification light. To turn off slow blinking, select Menu > Tools > Profiles and a profile. Select Personalise > Breathing light.
Set up your device Set up your device Set up your E66 following these instructions. Insert the SIM card and battery 1. With the back of the device facing you, press the release buttons (1) and slide the back cover off (2). 3. Insert the SIM card. Make sure that the contact area on the card is facing the connectors on the device and that the bevelled corner is facing the top of the device. 2. If the battery is inserted, lift the battery in the direction of the arrow to remove it. 4. Insert the battery.
Set up your device 5. Slide the back cover back to place. Insert the memory card Charge the battery 18 Your battery has been precharged at the factory, but the charging levels may vary. To reach the full operation time, charge the battery until it has been fully charged according to the battery level indicator. Tip: If you have old compatible Nokia chargers, you can use them with the Nokia E66 by attaching the CA-44 charger adapter to the old charger. The adapter is available as a separate enhancement.
3. Push the card in until it locks into place. 4. Close the back cover. Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety. Connect the compatible headset to the headset connector of your device. Set up your device Connect the headset Eject the memory card Important: Do not remove the memory card in the middle of an operation when the card is being accessed.
Set up your device 20 the antenna area unnecessarily while the antenna is transmitting or receiving. Contact with such an antenna affects the communication quality and may cause the device to operate at a higher power level than otherwise needed and may reduce the battery life.
After you have set up your device, switch it on and start to explore what is new in Eseries. First start-up 1. Press and hold the power key. 2. If the device asks for a PIN code or lock code, enter the code, and select OK. 3. When prompted, enter the country in which you are located and the current date and time. To find your country, enter the first letters of the country name.
Get started The available items may vary between regions. Settings wizard Select Menu > Tools > Sett. wizard. Settings wizard configures your device for settings based on your network operator information. To use these services, you may have to contact your service provider to activate a data connection or other services.
Select Menu. The menu is a starting point from which you can open all applications in the device or on a memory card. The menu contains applications and folders, which are groups of similar applications. All applications you install in the device yourself are by default saved in the Installations folder. To open an application, scroll to it, and press the scroll key. To view the applications in a list, select Options > Change Menu view > List.
Get started interrupted data transfer earlier. The items that you can transfer vary depending on the other device. Transfer content between devices To connect the two devices, follow the instructions on the display. For some device models, the Switch application is sent to the other device as a message. To install Switch on the other device, open the message, and follow the instructions on the display. On your new Eseries device, select the content you want to copy from the other device.
To save the settings that you have configured in an application, select Back. To save a file, select Options > Save. There are different saving options depending on the application you use. To send a file, select Options > Send. You can send a file in an e-mail or multimedia message, or using different connectivity methods. To copy, press and hold the shift key, and select the text with the scroll key. Press and hold the shift key, and select Copy.
Get started Bluetooth is active. Data is being transmitted using Bluetooth connectivity. When the indicator is blinking, your device is trying to connect with another device. An infrared connection is active. If the indicator blinks, your device is trying to connect to the other device, or the connection has been lost. A GPRS packet data connection is available (network service). If the icon is , the connection is active. If the icon is , the connection is on hold.
Your push-to-talk connection is in the do not disturb mode, because the ringing type setting of your device is set to Beep once or Silent, or you have an incoming or ongoing phone call. In this mode, you cannot make PTT calls. Volume control To adjust the earpiece volume during a phone call or the volume of the media applications, use the volume keys. Memory There are two types of memory into which you can save data or install applications: device memory and memory card.
Get started Use a memory card To format a memory card for your device, select Options > Format memory card. When a memory card is formatted, all data on the card is lost permanently. Consult your retailer to find out if you must format the memory card before you can use it. To change the name of the memory card, select Options > Memory card name. Write text The input methods provided in the device may vary according to different sales markets.
Write the first half of a compound word; to confirm it, scroll right. Write the last part of the compound word. To complete the compound word, press 0 to add a space. To switch predictive text input off for all editors in the device, press # twice quickly. Change the writing language To browse the help topics and conduct searches, select Menu > Help > Help. You can select categories for which you want to see instructions.
New from Eseries New from Eseries Your new Eseries device contains new versions of the Calendar and Contacts applications, as well as a new home screen. Access tasks quickly Whenever you see the icon on the home screen, or in the Contacts or Calendar applications, scroll right to access a list of available actions. To close the list, scroll left. When you navigate in these applications, to go back to the previous level, scroll left.
To call the contact, press the call key. To set off the contact search, select Options > Contact search off. To check your received messages, scroll to the message box in the notification area. To read a message, scroll to it and press the scroll key. To access other tasks, scroll right. To view your missed calls, scroll to the calls box in the notification area. To return a call, scroll to a call and press the call key.
New from Eseries press the scroll key. To close the selected application, press the backspace key. Leaving applications running in the background increases the demand on battery power and reduces the battery life. Contacts key To open the Contacts application, press the contacts key briefly. To create a new contact, press the contacts key for a few seconds. Calendar key To open the Calendar application, press the calendar key briefly.
View calendar information In the month view, calendar entries are marked with a triangle. Anniversary entries are also marked with an exclamation mark. The entries of the selected day are shown in a list. To open calendar entries, open a calendar view, scroll to an entry, and press the scroll key. Create calendar entries You can create the following types of calendar entries: • Meeting entries remind you of events that have a specific date and time.
New from Eseries Calendar settings Select Options > Settings. To change the alarm tone, select Calendar alarm tone. To change the view displayed when you open the calendar, select Default view. To change the first day of the week, select Week starts on. To change the week view title, select Week view title and Week number or Week dates. Nokia Contacts for Eseries Select Menu > Communic. > Contacts.
Manage contacts directories If you have installed contacts directories, to change the contacts directory, scroll to the top of the names list, press the scroll key, and select from the list of available directories. To organise contacts directories, select Options > Organise contact lists and a directory. Scroll up to move it to the desired place. Add ringing tones for contacts You can set a ringing tone for a contact or contact group. The ringing tone sounds when the contact calls you.
Personalisation Personalisation You can personalise your device by adjusting the various tones, background images, and screen savers, for example. Profiles To delete a profile that you created, select Options > Delete profile. You cannot delete the predefined profiles. Select Menu > Tools > Profiles. You can adjust and customise the ringing tones, alert tones, and other device tones for different events, environments, or caller groups.
Select Options > Personalise, and define the following: • Ringing tone — Select a ringing tone from the list, or select Download sounds to open a bookmark folder containing a list of bookmarks for downloading tones using the browser. If you have two alternate phone lines in use, you can specify a ringing tone for each line. • Video call tone — Select a ringing tone for video calls.
Personalisation Change the display theme Select Menu > Tools > Themes. To change the theme used in all applications, select the General folder. To change the theme used in the main menu, select the Menu view folder. To change the theme for a particular application, select the application-specific folder. To change the background image of the home screen, select the Wallpaper folder. To select an animation for the screen saver, select the Power saver folder.
Media Media Your device contains a variety of media applications for both business and leisure time use. For more information, see the extended user guide on the web. Switch between the video mode and the image mode. Select the scene. Select the flash mode (images only). Camera Activate the sequence mode (images only). Capture an image Adjust the white balance. Select Menu > Media > Camera. Your device supports an image capture resolution of up to 2048 x 1536 pixels.
Media To make your own scene, scroll to User defined, and select Options > Change. To copy the settings of another scene, select Based on scene mode and the desired scene. To activate your own scene, scroll to User defined, press the scroll key, and select Select. Capture images in a sequence To capture several images in a sequence, if enough memory is available, select Sequence mode in the toolbar and press the scroll key. The captured images are shown in a grid on the display.
To enter a new name for the clip, select Options > Rename video. Image settings To change the still image settings, select Options > Settings and from the following: • Image quality — Set the image quality. The better the image quality, the more memory the image consumes. • Show captured image — To see the image after the capture, select On. To continue taking pictures immediately, select Off. • Default image name — Define the default name for the captured images.
Media With the Nokia Podcasting application, you can search, discover, subscribe, and download podcasts over the air; and play, manage, and share podcasts with your device. Define the connection and downloading settings before using the application. Select Options > Settings > Connection and Download. To search for new podcast episodes to subscribe to, select Directories. To search for podcasts using keywords and podcast show titles, select Search.
To start a new search, select Options > New search. or video content over the internet using either RSS or Atom technologies for playback on mobile devices and PCs. You can transfer music from other compatible devices to your device. See "Transfer music from PC", p. 44. Podcasting settings Play a song or a podcast episode To see the details of a podcast, select Options > Description. To edit the connection settings, select Options > Settings > Connection.
Media Playlists To view and manage playlists, select Music > Playlists. storage as the connection mode. Make sure that a compatible memory card is inserted in the device. If you select Media transfer as the connection mode, you can use Windows Media Player to synchronise music between your device and PC. To add songs to the playlist, select the song and Options > Add to a playlist > Saved playlist or New playlist.
1. To activate the automatic synchronisation function in Windows Media Player, click the Sync tab, select Nokia Handset > Set Up Sync..., and check the Sync this device automatically check box. 2. Select the playlists you want to synchronise automatically in the Available playlists pane, and click Add. The selected items are transferred to the Playlists to sync pane. 3. To finalise the setup for automatic synchronisation, click Finish.
Media Recorder Select Menu > Media > Recorder. With Recorder, you can record up to 60 minutes of a voice memo, save the voice recording as a sound clip, and play the sound clip. Recorder supports the AMR file format. You can also press the voice key to open the Recorder application. If you have logged in to push to talk, the voice key works as a push-to-talk key and does not open Recorder. Record a sound clip To record a sound clip, select Options > Record sound clip.
To open a file or a folder, scroll to it, and press the scroll key. To create a new folder, select a file and then select Options > Organise > New folder. You cannot create folders within folders. To copy or move files, select a file and Options > Organise > Move to folder, New folder, Move to memory card, Copy to memory card, Copy to phone mem., or Move to phone mem.. To download files into Gallery using the browser, select Downl. graphics, Downld. videos, Downld. tracks, or Downld. sounds.
Media does not necessarily support all variations of a media file format. Play video clips and stream links Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. To play a video clip or audio file, select Options > Open > Most recent clips to play one of the six clips you most recently played, or Saved clip to play a clip or open a web link. Select Play.
To organise your flash files, select Options > Organise. To define the settings manually, select Options > Settings > Video or Streaming. Radio You may receive RealPlayer settings in a message from your service provider. Media RealPlayer settings Select Menu > Media > Flash Player. With Flash player, you can view, play, and interact with flash files made for mobile devices. Select Menu > Media > Radio.
Media To adjust the volume, use the volume keys. To switch from headset use to listening to the radio through the loudspeaker, select Options > Activate loudspeaker. To return to the home screen and leave the FM radio playing in the background, select Options > Play in background. View visual content To check availability and costs, and to subscribe to the service, contact your service provider.
Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. To listen to a radio station on the internet, select a station from the station directory, search stations by their name from the Nokia Internet Radio service, or select Options > Add station manually. When you have found the correct station, select Listen.
Media Internet radio settings To select the default access point to connect to the network, select Options > Settings > Default access point. Select Always ask if you want the device to ask for the access point every time you open the application. To change the connection speed for GPRS packet data connections, select Options > Settings > GPRS connection bitrate. To change the connection speed for 3G packet data connections, select Options > Settings > 3G connection bitrate.
Internet Internet With your new Eseries device you can browse both the internet and your company's intranet, and download and install new applications to your device. You can also use your device as a modem and connect your PC to the internet. Web Select Menu > Web. To browse the web (network service), you need to configure the internet access point settings.
Internet open a page, scroll to its address, and press the scroll key. To move on a web page, use the scroll key, which is shown as a pointer on the page. When you move the pointer over a link, the pointer changes into a hand. Press the scroll key to open the link. On a web page, new links usually appear underlined in blue and previously visited links in purple. Images that act as links have a blue border around them. The addresses of the pages you visit are saved in the Auto. bookmarks folder.
Browse the intranet Select Menu > Office > Intranet. To browse your company's intranet, you must create a company-specific VPN policy. Select Menu > Tools > Settings > Connection > VPN. To connect to the intranet, open the Intranet application, select the connection method and Options > Connect. To define which VPN profile to use in the connection, select Options > Use other VPN policy. To define the settings for the intranet connection, select Options > Settings. Download! Select Menu > Download!.
Internet Download! search Scroll to the catalogues from which you want to search for items, select Mark to select them, and enter the search keywords. To start the search, select Options > Search. Purchase history To open the selected item with the corresponding application, select Options > Open. To view file details of the selected item, select Options > View details. To start, pause, resume, or cancel the download of the selected item, select Options and the corresponding option.
Advanced internet access point settings for packet data (GPRS) Select Menu > Tools > Settings > Connection > Access points. After setting up a basic internet access point for packet data (GPRS), select Options > Advanced settings, and define the following advanced settings: • Network type — Select IPv4 or IPv6 as the internet protocol type. The internet protocol defines how data is transferred to and from your device. • Phone IP address — Enter the IP address of your device.
Internet • Connection name — Enter a descriptive name for the connection. • Data bearer — Select Wireless LAN. • WLAN network name — To enter the service set identifier (SSID), that is, the name that identifies the specific WLAN, select Enter manually. To select the network from the WLANs in range, select Search for networks. • Network status — Select Hidden if the network you are connecting to is hidden or Public if it is not hidden.
Internet web is established, the web browser of your PC opens. You must have administrator rights to your PC, and the autorun option enabled in the PC. If not, run the setup.exe file from the CD-ROM drive of your PC.
Messaging 60 Messaging Select Menu > Communic. > Messaging. In Messaging (network service), you can send and receive text messages, multimedia messages, audio messages, and e-mail messages. You can also receive web service messages, cell broadcast messages, and special messages containing data, and send service commands. Before sending or receiving messages, you may need to do the following: • Insert a valid SIM card in the device and be located in the service area of a cellular network.
Organise messages To create a new folder to organise your messages, select My folders > Options > New folder. To rename a folder, select Options > Rename folder. You can only rename folders that you have created. To pause the reading, press the left selection key briefly. To continue, press the left selection key briefly again. To end the reading, press the end key. Speech Select Menu > Tools > Speech. With Speech, you can set the language, voice, and voice properties for the message reader.
Messaging 62 To receive and send e-mail, you must have a remote mailbox service. This service may be offered by an internet service provider, a network service provider, or your company. Your device is compliant with internet standards SMTP, IMAP4 (revision 1), and POP3, and with different vendor-specific e-mail solutions. Other e-mail providers may offer services with different settings or features than those described in this user guide. Contact your e-mail provider or service provider for more details.
Mail for Exchange With Mail for Exchange, you can receive your work email to your E66 . You can read and reply to your emails, view and edit attachments, view calendar information, receive and reply to meeting requests, schedule meetings, and view, add, and edit contact information. Mail for Exchange can be set up only if your company has Microsoft Exchange Server. In addition, your company's IT administrator must have activated Mail for Exchange for your account.
Messaging 9. Enter the domain name of your network, and select OK. 10. Enter the Mail for Exchange server name, and select OK. 11. Select Yes to install the Mail for Exchange application to your device. After installation, you may create your Mail for Exchange profile by changing the settings. However, depending on your company, the profile may be created automatically. Regular POP or IMAP e-mail Your device can download e-mails from a POP or IMAP e-mail account.
Read and reply to e-mail Important: Exercise caution when opening messages. Messages may contain malicious software or otherwise be harmful to your device or PC. To read a received e-mail, open it from the mailbox. To open an attachment, select Options > Attachments. Scroll to the attachment, and press the scroll key. To reply only to the sender of an e-mail, select Options > Reply > To sender. To reply to all recipients of an e-mail, select Options > Reply > To all.
Messaging To delete e-mail both from the device and the remote server, select Options > Delete > Phone and server. To cancel the deleting, select Options > Restore. Subfolders in your remote e-mail If you create subfolders in your IMAP4 mailboxes on a remote server, you can view and manage these folders with your device when you subscribe to them. You can only subscribe to folders in your IMAP4 mailboxes.
Text messages on the SIM card Select Menu > Communic. > Messaging > Options > SIM messages. Text messages may be stored on your SIM card. Before you can view SIM messages, you must copy the messages to a folder in the device. After copying the messages to a folder, you can view them in the folder or delete them from the SIM card. 1. Select Options > Mark/Unmark > Mark or Mark all to mark every message. 2. Select Options > Copy. 3. Select a folder and OK to begin copying.
Messaging 68 multimedia message settings. If not, use Settings wizard, or contact your service provider for the correct settings. See "Multimedia message settings", p. 75. Create and send multimedia messages Important: Exercise caution when opening messages. Messages may contain malicious software or otherwise be harmful to your device or PC. 1. To create a new message, select New message > Multimedia message. 2.
Create presentations Creating multimedia presentations is not possible if the MMS creation mode setting is set to Restricted. To change the setting, select Messaging > Options > Settings > Multimedia message > MMS creation mode > Free. 1. To create a presentation, select New message > Multimedia message. 2. In the To field, enter a recipient's number or e-mail address, or press the scroll key to add a recipient from Contacts.
Messaging View and save multimedia attachments To view multimedia messages as complete presentations, open the message, and select Options > Play presentation. Tip: To view or play a multimedia object in a multimedia message, select View image, Play sound clip, or Play video clip. To view the name and size of an attachment, open the message, and select Options > Objects. To save a multimedia object, select Options > Objects, the object, and Options > Save.
Instant messaging Select Menu > Communic. > IM. Instant messaging (IM) (network service) allows you to converse with other people using instant messages and join discussion forums (IM groups) with specific topics. Various service providers maintain IM servers that you can log in to after you register to an IM service. Service providers may differ in their support of features. If IM is not available from your service provider, it may not appear in the menu of your device.
Messaging To view a conversation, select a participant. To continue the conversation, enter your message, and select Options > Send. To return to the conversations list without closing the conversation, select Back. To close the conversation, select Options > End conversation. To start a new conversation, select Options > New conversation. You can start a new conversation with a contact while you are inside an active conversation. However, you cannot have two active conversations with the same contact.
To allow receiving messages from a blocked IM user, select Options > Unblock. To prevent receiving messages from other IM users, select Options > Block new contacts. Select the IM user from your IM contacts, or enter the user ID. IM application settings Select Options > Settings > IM settings and define the following settings: • Use screen name — To change the name that identifies you in IM groups, select Yes.
Messaging To view information about the sender, web address, expiration date, and other details of the message before downloading it, select Options > Message details. Send service commands You can send a service request message (also known as a USSD command) to your service provider and request activation for certain network services. Contact your service provider for the service request text. To send a service request message, select Options > Service command.
Multimedia message settings Select Menu > Communic. > Messaging > Options > Settings > Multimedia message. Select from the following: • Image size — Select Small or Large to scale images in multimedia messages. Select Original to maintain the original image size. • MMS creation mode — Select Restricted to have your device prevent you from including content in multimedia messages that may not be supported by the network or the receiving device.
Messaging • Deny report sending — Select Yes to not send delivery reports from your device for received multimedia messages. • Message validity — Select how long the messaging centre tries to send the message (network service). If the recipient of a message cannot be reached within the validity period, the message is removed from the multimedia messaging centre. Maximum time is the maximum amount of time allowed by the network. E-mail account settings Select Menu > Communic.
• E-mail notifications — Select whether you want to receive notifications on received e-mail. To define the automatic retrieval settings for an e-mail account, select the account, select Options > Edit > Automatic retrieval, and define the following settings: • E-mail retrieval — Select Enabled to retrieve new e-mail messages automatically from your remote mailbox, or Only in home netw.
Messaging 78 Select from the following: • Save sent messages — Select whether to store sent messages in the Sent folder. • Number of saved msgs. — Enter the number of sent messages to save. When the limit is reached, the oldest message is deleted. • Memory in use — Select where to save your messages. You can save messages to the memory card only if a memory card is inserted. • Folder view — Define how you want the messages in Inbox to be shown.
Phone Phone To make and receive calls, the device must be switched on, the device must have a valid SIM card installed, and you must be located in the service area of a cellular network. To make or receive a net call, your device must be connected to a net call service. To connect to a net call service, your device must be in the coverage of a connection network, such as a WLAN access point.
Phone to the name, and press the call key. See "Nokia Contacts for Eseries", p. 34. To make a call using the log, press the call key to view up to 20 numbers that you last called or attempted to call. Scroll to the desired number or name, and press the call key. See "Log", p. 89. To adjust the volume of an active call, use the volume keys. To switch from a voice call to a video call, select Options > Switch to video call. The device ends the voice call and makes a video call to the recipient.
4. To end sharing the video, select Stop. The voice call continues normally. To zoom the image on the display, select Options > Zoom in or Zoom out. When you receive a video sharing invitation, a message is displayed showing the caller's name or SIP address. To swap the places of images, select Options > Change image order. To end the video call and make a new voice call to the same recipient, select Options > Switch to voice call.
Phone capabilities. Contact your net call provider to check the internet telephony emergency call capability. With the net call service (network service), you can make and receive calls over the internet using the VoIP (voice over internet protocol) technology. Net calls can be established between computers, between mobile phones, and between a VoIP device and a traditional telephone. To make or receive a net call, your device must be within WLAN coverage, for example.
WLANs, which increases the demand on battery power and reduces the battery life. Make net calls To view the networks you have saved for the net call service and the networks detected by the net call service, select Saved conn. networks. To end the connection to a net call service, select Options > Disconnect from service. You can make a net call from all applications where you can make a regular voice call. For example in Contacts, scroll to the desired contact, and select Call > Internet call.
Phone Call divert Select Menu > Tools > Settings > Phone > Call divert. Divert incoming calls to your voice mailbox or to another phone number. For details, contact your service provider. Select to divert voice, data, or fax calls, and select from the following options: • All voice calls, All data calls, or All fax calls — Divert all incoming voice, data, or fax calls. • If busy — Divert incoming calls when you have an active call.
Bar net calls Select Menu > Tools > Settings > Phone > Call barring > Internet call barring. To reject net calls from anonymous callers, select Anonymous call barring > On. Send DTMF tones You can send dual tone multi-frequency (DTMF) tones during an active call to control your voice mailbox or other automated phone services. Send a DTMF tone sequence 1. Make a call, and wait until the other end answers. 2. Select Options > Send DTMF. 3. Enter the DTMF tone sequence, or select a predefined sequence.
Phone The Voice aid application reads text on the display, allowing you to use the basic functions of your device without looking at the display. To hear the entries in your contacts list, select Contacts. Do not use this option if you have more than 500 contacts. To hear information on your missed and received calls, dialled numbers, and frequent calls, select Recent calls. To listen to your voice messages, select Voice mailbox. To dial a telephone number, select Dialler.
Launch an application The device creates voice tags for the applications listed in the Voice commands application. To launch an application using a voice command, press and hold the voice key, and clearly speak the name of the application. If the recognised application was not correct, select Next to view a list of other matches or Quit to cancel. To add more applications to the list, select Options > New application.
Phone PTT settings Select Options > Settings and select User settings to define your preferences for PTT, or Connection settings to change the connection details. Contact your service provider for the correct settings. Tip: You may also receive the settings in a message from the provider of the PTT service. Log in to PTT service If you have set Application start-up on in User settings, PTT automatically logs in to the service when started. If not, you must log in manually.
Create a PTT channel To create a channel, select Options > New channel > Create new. To join a channel, select the channel you want to talk to, and press the voice key. To invite a user to a channel, select Options > Send invitation. To view the currently active users of a channel, select Options > Active members. When you log in to PTT, you are automatically connected to the channels that were active when the application was last closed. Exit PTT To exit PTT, select Options > Exit.
Phone To copy the number, for example to paste it to a text message, select Options > Use number > Copy. To view a single type of communication event or communication events with one other party, select Options > Filter, and select the desired filter. To erase the contents of the log, recent calls register, and messaging delivery reports permanently, select Options > Clear log.
Need directions? Looking for a restaurant? Your Eseries device has the tools to get you where you want to be. About GPS and satellite signals The Global Positioning System (GPS) is a worldwide radio navigation system that includes 24 satellites and their ground stations that monitor the operation of the satellites. Your device has an internal GPS receiver. A GPS terminal receives low-power radio signals from the satellites and measures the travel time of the signals.
Travelling • If the weather conditions are bad, the signal strength may be affected. • Establishing a GPS connection may take from a couple of seconds to several minutes. Satellite status To check how many satellites your device has found, and whether your device is receiving satellite signals, select Menu > GPS > GPS data > Position > Options > Satellite status. If your device has found satellites, a bar for each satellite is shown in the satellite info view.
To connect to the internet automatically when you start Maps, select Options > Tools > Settings > Internet > Go online at start-up > Yes. To prevent automatic downloading of maps, select Options > Tools > Settings > Internet > Go online at start-up > Never. To set the device to ask your permission before connecting to the internet, select Options > Tools > Settings > Internet > Go online at start-up > Always ask.
Travelling Initially, your device must receive signals from at least four satellites to calculate the coordinates of your location. After the initial calculation, signals from three satellites may be enough. shows the The data transfer indicator internet connection used and the amount of data transferred since the application started. Find locations To find a location in the city or area displayed on the map, enter the full or partial address of the location in the search field, and press the scroll key.
To purchase a licence for pedestrian navigation, select Options > Extras > Walk. The licence is regionspecific and can be used only in the selected area. You can pay for the licence through a credit card or in your phone bill, if supported by your service provider. Tip: To try out navigation for three days with a free licence, press the scroll key, and select Walk to. Maps checks if a free licence is available for your device. To activate the licence, select OK. You can only use the licence once.
Travelling Travel guides Travel guides provide information about attractions, restaurants, hotels, and other points of interest. Some guides contain videos and audio clips. The guides must be purchased and downloaded before use. Downloading travel guides may involve the transmission of large amounts of data through your service provider’s network. Contact your service provider for information about data transmission charges.
To enter the altitude calibration to correct the altitude received from the positioning satellites, select Options > Settings > Altitude calibration. Landmarks Select Menu > GPS > Landmarks. Landmarks are coordinates to geographic locations that you can save to your device for later use in different location-based services. You can create landmarks using the internal GPS receiver of your device or network (network service). Create a landmark To create a landmark, select Options > New landmark.
Travelling Receive landmarks Select Menu > Communic. > Messaging. Open a message that contains a landmark you have received from another device. Scroll to the landmark, and press the scroll key. To save the landmark in your device, select Options > Save. To forward the landmark to compatible devices, select Options > Send. To show the received landmark on the map, select Options > Show on map. To find out how to navigate to the received landmark, select Options > Show route.
Nokia Office Tools support mobile business and enable effective communication with work teams. Active notes To add boldface, italics, or underlining to your text or change the font colour, press and hold the shift key and use the scroll key to select the text. Then select Options > Text. To send the note, select Options > Send. Select Menu > Office > Active notes. Active notes allows you to create, edit, and view different kinds of notes, for example, meeting memos, hobby notes, or shopping lists.
Nokia Office Tools remove the links between notes and contact cards. Calculator Select Menu > Office > Calculator. This calculator has limited accuracy and is designed for simple calculations. To make a calculation, enter the first number of the calculation. Select a function such as add or subtract from the function map. Enter the second number of the calculation, and select =. The calculator performs operations in the order they are entered.
To open a file, scroll to it, and press the scroll key. To sort files according to the type, select Options > Sort by. To view the details of a file, select Options > Details. The details include the name, size and location of the file, and the time and date when the file was last modified. To send files to a compatible device, select Options > Send and the sending method. Converter Select Menu > Office > Converter. The converter has limited accuracy, and rounding errors may occur.
Nokia Office Tools archives; and change settings, such as compression level, and file name encoding. You can store the archive files on the device memory or on a memory card. PDF reader Select Menu > Office > Adobe PDF. With PDF reader you can read PDF documents on the display of your device; search for text in the documents; modify settings, such as zoom level and page views; and send PDF files using e-mail.
Select Menu > Office > Printers. To add a new printer, select Options > Add. Define the following: • Printer — Enter a name for the printer. • Driver — Select a driver for the printer. • Bearer — Select a bearer for the printer. • Access point — Select the access point. • Port — Select the port. • Host — Define the host. • User — Enter the user. • Queue — Enter the print queue. • Orientation — Select the orientation. • Paper size — Select the paper size. • Media type — Select the media type.
Nokia Office Tools To change the time or date, select Time or Date. To change the clock shown on the home screen, select Clock type > Analogue or Digital. To allow the mobile phone network to update the time, date, and time zone information to your device (network service), select Network operator time > Auto-update. To change the alarm tone, select Clock alarm tone. Notes Select Menu > Office > Notes. You can create and send notes to other compatible devices, and save received plain text files (.
Your device offers several options to connect to the internet, a corporate intranet, or to another device or computer. Fast downloading High-speed downlink packet access (HSDPA, also called ) is a network service in UMTS 3.5G, indicated by networks and provides high-speed data downloads. When HSDPA support in the device is activated and the device is connected to a UMTS network that supports HSDPA, downloading data such as messages, e-mail, and browser pages through the cellular network may be faster.
Connectivity To use Nokia PC Suite with your device, install Nokia PC Suite on your PC, connect the data cable, and select PC Suite. To use your device to connect your PC to the web, connect the data cable, and select Connect PC to web. To synchronise the music in your device with Nokia Music Player, install the Nokia Music Player software on your PC, connect the data cable, and select Media transfer.
Send and receive data with Bluetooth 1. When you activate Bluetooth for the first time, you are asked to give a name to your device. Give your device a unique name to make it easy to recognise if there are several Bluetooth devices nearby. 2. Select Bluetooth > On. 3. Select My phone's visibility > Shown to all or Define period. If you select Define period, you need to define the time during which your device is visible to others.
Connectivity Before pairing, decide on your own passcode (1-16 digits), and agree with the user of the other device to use the same code. Devices that do not have a user interface have a fixed passcode. You need the passcode only when you connect the devices for the first time. After pairing, it is possible to authorise the connection.
With the SIM access profile, you can access the SIM card of your device from a compatible car kit device. This way, you do not need a separate SIM card to access SIM card data and connect to the GSM network.
Connectivity 110 available in the location and your device must be connected to it. WLAN connections Important: Always enable one of the available encryption methods to increase the security of your wireless LAN connection. Using encryption reduces the risk of unauthorised access to your data. To use WLAN, you must create an internet access point in a WLAN. Use the access point for applications that need to connect to the internet.
To disconnect the active connection to the WLAN, select Options > Disconnect WLAN. To view the details of the WLAN, select Options > Details. To save the access point of the WLAN, select Options > Define access point. Always enable one of the available encryption methods to increase the security of your WLAN connection. Using encryption reduces the risk of unauthorised access to your data.
Connectivity • You need an appropriate data communications software on your computer, such as Nokia PC Suite. For more information, see the Nokia PC Suite guide. • You must subscribe to the appropriate network services from your service provider or internet service provider. • You must have the appropriate drivers installed on your computer. You must install drivers for the cable connection, and you may need to install or update Bluetooth or infrared drivers.
Manage the data and software on your device, and take care of the security of the device and its contents. Important: Your device can only support one antivirus application. Having more than one application with antivirus functionality could affect performance and operation or cause the device to stop functioning. Lock the device Important: If the device has been locked, enter the lock code to activate the phone function. When the device is locked, calls may be possible to the official emergency number.
Security and data management you are asked for the password. Not all memory cards support password protection. To remove the memory card password, select Options > Remove password. When you remove the password, the data on the memory card is not protected against unauthorised use. To open a locked memory card, select Options > Unlock memory card. Enter the password.
Certificate manager Select Menu > Tools > Settings > General > Security > Certificate management. Digital certificates are used to verify the origins of software but do not guarantee safety. There are four different types of certificates: authority certificates, personal certificates, trusted site certificates, and device certificates. During a secure connection, a server may send a server certificate to your device. Upon receipt, it is checked through an authority certificate stored in your device.
Security and data management 116 • Expired certificate — The period of validity has ended for the selected certificate. • Certificate not valid yet — The period of validity has not yet begun for the selected certificate. • Certificate corrupted — The certificate cannot be used. Contact the certificate issuer. Certificate trust settings Trusting a certificate means that you authorise it to verify web pages, e-mail servers, software packages, and other data.
Back up data It is recommended to back up device memory regularly to the memory card or a compatible computer. To back up information from the device memory to a memory card, select Menu > Tools > Memory > Options > Back up phone memory. To restore information from the memory card to the device memory, select Menu > Tools > Memory > Options > Restore from card. You can also connect your device to a compatible computer and use Nokia PC Suite to back up data.
Security and data management 118 • Auto-accept all requests — Select Yes if you do not want the server to ask for your confirmation when it initiates a configuration session. • Network authentication — Select whether to use http authentication. • Network user name — Enter your user ID for the http authentication. This setting is available only if you have selected Network authentication to be used. • Network password — Enter your password for the http authentication.
To view the installation log, select Options > View log. A list shows what software has been installed and removed, and the date of the installation or removal. If you encounter problems with the device after installing a software package, use this list to find out which software package may be the cause of the problem. The information in this list may also help you pinpoint problems that are caused by software packages that are incompatible with each other. To remove software, select Options > Remove.
Security and data management • Landmarks — Allow the application to use the landmarks in your device. You can define how you are prompted to confirm the Java application's access to the device functions. Select one of the following values: • Ask every time — Require the Java application to ask for your confirmation each time it uses the functionality. • Ask first time — Require the Java application to ask for initial confirmation to use the functionality.
To activate a key, go to the Activation keys main view, and select Invalid keys > Options > Get activation key. Establish a network connection at the prompt, and you are directed to a web site where you can purchase rights to the media. To remove file rights, open the valid keys tab or the keys not in use tab, scroll to the desired file, and select Options > Delete. If there are several rights related to the same media file, all the rights are deleted.
Security and data management 122 Select applications to synchronise 1. To select the applications to synchronise with a synchronisation profile, select Options > Edit sync profile > Applications. 2. Select the desired application, and select Include in sync > Yes. 3. Specify the Remote database and Synchronisation type settings.
Manage VPN Select VPN management, and from the following: • VPN policies — Install, view, and update VPN policies. • VPN policy servers — Edit the connection settings of VPN policy servers from which you can install and update VPN policies. A policy server refers to a Nokia Security Service Manager (NSSM), which is not necessarily required. • VPN log — View the log for your VPN policy installations, updates and synchronisations, and other VPN connections.
Security and data management 2. If you are using legacy authentication, enter your VPN user name and passcode or password. If the SecurID token has become out of synchronisation with the clock of the ACE/Server, enter the next passcode. If you are using certificate-based authentication, you may have to enter the key store password. Barcode reader Select Menu > Tools > Barcode. Use the Barcode reader application to decode barcodes.
Settings Settings Select Menu > Tools > Settings. You can define and modify various settings of your device. Modifying these settings affects the operation of your device across several applications. Some settings may be preset for the device or sent to you in a special message by your service provider. You may not be able to change such settings. Select the setting you want to edit to do the following: • Switch between two values, such as on or off. • Select a value from a list.
Settings To select a welcome note or logo for the display, select Display > Welcome note / logo. You can either choose the default welcome note, enter your own text, or select an image. To set how quickly the display dims after the last keypress, select Display > Light time-out. Standby mode settings To select whether to use the home screen, select Home screen > Home screen. To set the various alert tones, select Tones > Message alert tone, E-mail alert tone, Calendar alarm tone, or Clock alarm tone.
To define the clock type, select Clock type > Analogue or Digital. Settings for One-touch keys To determine the week days that are work days for you, select Workdays. To select of which events you want to be notified, select Notification light > Notified events. Select Menu > Tools > Settings > General > Personalisation > One-touch keys. To select which application and task is opened when you press a One-touch key, select the key and Options > Open.
Settings Beep once or Silent in the selected profile, the automatic answer is disabled. To illuminate the device while it is attached to an enhancement, select Lights > On. E-mail key settings To select which mailbox to open with the e-mail key, select E-mail key settings > E-mail key, and press the scroll key. Security settings Select Menu > Tools > Settings > General > Security. Define the following security settings: • Phone and SIM card — Adjust the security settings for your device and SIM card.
Select Menu > Tools > Settings > Phone. Select from the following: • Call — Define general call settings. • Call divert — Define your call divert settings. See "Call divert", p. 84. • Call barring — Define your call barring settings. See "Call barring", p. 84. • Network — Adjust the network settings. Call settings To display your phone number to the person you are calling, select Call > Send my caller ID > Yes. To let the network determine whether your caller ID is sent, select Set by network.
Settings 130 Connection settings Select Menu > Tools > Settings > Connection. Select from the following: • Bluetooth — Edit the Bluetooth settings. See "Send and receive data with Bluetooth", p. 107. • USB — Edit the data cable settings. See "Data cable", p. 105. • Access points — Set up new or edit existing access points. Some or all access points may be preset for your device by your service provider, and you may not be able to create, edit, or remove them.
WLAN settings Select Menu > Tools > Settings > Connection > Wireless LAN. To have an indicator displayed when there is a WLAN available in your current location, select Show WLAN availability > Yes. To select the interval for your device to scan for available WLANs and update the indicator, select Scan for networks. This setting is not available unless you select Show WLAN availability > Yes. Advanced WLAN settings Select Options > Advanced settings.
Settings In an ad-hoc network, all devices must use the same WEP key. Select WLAN security settings and from the following: • WEP key in use — Select the desired WEP key. • Authentication type — Select Open or Shared. • WEP key settings — Edit the settings for the WEP key. WEP key settings In an ad-hoc network, all devices must use the same WEP key. Select WLAN security settings > WEP key settings and from the following: • WEP encryption — Select the desired WEP encryption key length.
EAP plug-ins 1. To define the EAP plug-in settings, select Options > New access point and define an access point that uses WLAN as a data bearer. 2. Select 802.1x or WPA/WPA2 as the security mode. 3. Select WLAN security settings > WPA/WPA2 > EAP > EAP plug-in settings. Use EAP plug-ins To use an EAP plug-in when you connect to a WLAN using the access point, select the desired plug-in and Options > Enable. The EAP plug-ins enabled for use with this access point have a check mark next to them.
Settings • Proxy server — Enter the proxy server settings for this SIP profile. • Registrar server — Enter the registration server settings for this SIP profile. Edit SIP proxy servers Select Options > New SIP profile or Edit > Proxy server. Proxy servers are intermediate servers between a browsing service and its users used by some service providers. These servers may provide additional security and speed up access to the service.
Select Menu > Tools > Settings > Connection > APN control. With the access point control service, you can restrict packet data connections from your device to certain access points only. Your SIM card may not support the access point control service. Contact your service provider for more information. Settings Restrict packet data To restrict the packet data connections from your device, select Options > Activate restrictions.
Shortcuts Shortcuts Here are some of the available keyboard shortcuts in your device. Shortcuts can make the use of the applications more efficient. General shortcuts General shortcuts Power key Press and hold to switch your device on and off. Press once to switch between profiles. Home screen 136 Number key (2– Call a phone number using speed 9) dialling. You must first activate speed dialling at Menu > Tools > Settings > Phone > Call > Speed dialling > On. Web * Zoom in the page.
Zoom in. Press twice for the full screen size. 4 Scroll left in the zoomed image. 2 Scroll up in the zoomed image. 3 Rotate clockwise. * Switch between the full screen size and normal view. 6 Scroll right in the zoomed image. 8 Scroll down in the zoomed image. 1 Rotate counterclockwise.
Glossary Glossary Glossary 3G 3rd generation mobile communications. A digital system for mobile communications which aims at global use and provides increased bandwidth. 3G lets a mobile device user access a wide variety of services, such as multimedia. Ad-hoc operating mode A WLAN network mode where two or more devices connect to each other using WLAN directly without a WLAN access point.
General packet radio service. GPRS enables wireless access for mobile phones to data networks (network service). GPRS uses packet data technology where information is sent in short bursts of data over the mobile network. The benefit of sending data in packets is that the network is occupied only when sending or receiving data. As GPRS uses the network efficiently, it allows for quick data connection setup and fast data transmission speeds. You must subscribe to the GPRS service.
Glossary 140 POP3 Post office protocol, version 3. A common mail protocol that can be used for accessing your remote mailbox. PUK and PUK2 Personal Unblocking Key. PUK and PUK2 codes are required to change a blocked PIN code or PIN2 code, respectively. The length of the code is 8 digits. SIP Session Initiation Protocol. SIP is used for creating, modifying, and terminating certain types of communication sessions with one or more participants. SSID Service set identifier.
Wi-Fi Protected Access. Security method for WLAN. WPA2 Wi-Fi Protected Access 2. Security method for WLAN.
Troubleshooting Troubleshooting To see frequently asked questions about your device, visit the product support pages at the Nokia web site. Q: What is my lock, PIN, or PUK code? A: The default lock code is 12345. If you forget or lose the lock code, contact your device dealer. If you forget or lose a PIN or PUK code, or if you have not received such a code, contact your network service provider. Q: How do I close an application that is not responding? A: Press and hold the home key.
A: The WLAN on your Nokia device switches off when you are not trying to connect, not connected to another access point, or not scanning for available networks. To further reduce battery consumption, you can specify that your Nokia device does not scan, or scans less often, for available networks in the background. WLAN switches off in between background scans. To stop the background scans, select Menu > Tools > Settings > Connection > Wireless LAN > Show WLAN availability > Never.
Troubleshooting Q: How can I end the data connection when the device starts a data connection again and again? A: The device may be trying to retrieve a multimedia message from the multimedia message centre. To stop the device from making a data connection, select Menu > Communic. > Messaging > Options > Settings > Multimedia message > Multimedia retrieval > Manual to have the multimedia messaging centre save messages to be retrieved later, or Off to ignore all incoming multimedia messages.
Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.
Battery and charger information 146 Battery and charger information Battery and charger information Your device is powered by a rechargeable battery. The battery intended for use with this device is BL-4U. Nokia may make additional battery models available for this device. This device is intended for use when supplied with power from the following chargers: AC-8. The exact charger model number may vary depending on the type of plug.
Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from a Nokia authorised service centre or dealer, and inspect the hologram label using the following steps: Successful completion of the steps is not a total assurance of the authenticity of the battery.
Battery and charger information 148 Nokia authorised service centre or dealer for assistance. The use of a battery that is not approved by Nokia may be dangerous and may result in poor performance and damage to your device and its accessories. It may also invalidate any approval or warranty applying to the device. To find out more about original Nokia batteries, see www.nokia.com/battery.
Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it. • Do not use or store the device in dusty, dirty areas.
Care and maintenance 150 Disposal The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available. Do not dispose of these products as unsorted municipal waste.
Small children Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Operating environment This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimetres (7/8 inch) away from the body. When a carry case, belt clip, or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body.
Additional safety information • Not carry the wireless device in a breast pocket. • Hold the wireless device to the ear opposite the medical device to minimise the potential for interference. • Turn the wireless device off immediately if there is any reason to suspect that interference is taking place. • Read and follow the directions from the manufacturer of their implanted medical device.
Emergency calls Important: This device operates using radio signals, wireless networks, landline networks, and user-programmed functions. If your device supports voice calls over the internet (internet calls), activate both the internet calls and the cellular phone. The device will attempt to make emergency calls over both the cellular networks and through your internet call provider if both are activated. Connections in all conditions cannot be guaranteed.
Additional safety information 154 standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station.
Symbols/Numerics 3-D ringing tones 38 802.
Index 156 voice mail 85 camera capturing images 39 image settings 41 playing videos 40 scenes 39 sequence mode 40 toolbar 39 video clips 40 video settings 41 viewing images 40 car kit remote SIM access 109 cell broadcast 74 settings 77 certificates details 115 settings 116 charging the battery 18 Clock alarms 103 settings 103 world clock 103 conference calls 80 configuration messages 134 connection methods Bluetooth 107 data cable 105 infrared 106 modem 111 connections ending 112 GPRS settings 56, 57 PC co
109 F feeds 54 File manager 100 files downloading 47 flash files 49 sending 100 fixed dialling 114 free memory 27 G Gallery 47 GPRS access point settings 56 advanced access point settings 57 settings 130 H headset connecting 19 home key 31 home screen 30 settings 37, 126 switching 31 HSDPA (high-speed downlink packet access) 105 I IM application settings 73 blocking users 72 groups 72 settings 71 starting a conversation 71 images adding to contacts 47 display background 47 rotating 47 sending 47 sh
Index Log 89 adding numbers to Contacts 89 deleting 89 making a call 90 sending messages 90 settings 90 transfer log 24 logos operator logo 126 welcome logo 125 M 158 mailboxes connecting 64 creating 64 making a call 79 Maps 92, 93 browsing 93 driving 95 finding locations 94 indicators 93 routes 94 traffic information 95 travel guides 96 walking 94 measurements converting 101 measuring system changing 96 memory 27 memory card backing up data 117 formatting 28 inserting 18 locking 113 microSD 27 passwor
PTT contacts 88 created calls 88 creating a channel 89 exiting 89 logging in 88 making a call 88 settings 88 Q Quickoffice 101 R radio listening to 49 saved stations 50 settings 50 viewing visual content 50 RealPlayer playing media clips 48 sending files 48 settings 49 viewing clip details 48 recorder playing recordings 46 recording a sound clip 46 settings 46 recording sound clips 46 remote configuration 117 remote lock 113 remote synchronisation 121 restoring original settings 128 ringing tones 126 3
Index 160 settings Active notes 99 advanced WLAN 131 application installations 119 applications 135 Calendar 34 calls 129 camera 41 cell broadcast 77 certificate 116 clock 103 contacts 35 date 127 display 125 Download! application 56 e-mail connection 76 e-mail key 128 e-mail retrieval 77 e-mail user 76 EAP plug-ins 133 enhancements 127 GPRS 56, 57, 130 home screen 126 IM 71 Internet radio 52 Java application security 119 keypad lock 128 language 126 Log 90 multimedia messages 75 net call 134 network 129 p
U UPIN code changing 128 USB data cable 105 V vibrating alert 126 video playing 40 video calls making a call 80 switching to voice call 80 video clips details 48 playing 48 sending 48 video sharing 81 receiving invitations 81 virtual private network access points 123 use in applications 123 Voice aid 85 voice commands changing profiles 87 launching an application 87 settings 87 voice mail calling 85 changing number 85 voice over IP 83 VoIP 83 volume 27 VPN access points 123 use in applications 123 W w
