User Guide

JXS-1 RF shield box

Because the WCDMA network disturbs the RX side testing of the WCDMA

phone and the Tx signal of the WCDMA phone can severely disturb the

WCDMA network, a shield box is needed in all testing, tuning and fault

finding which requires WCDMA RF signal.

The shield box is not an active device, it contains only passive filtering

components for RF attenuation.

MJ-120 Module jig

RM-208 specific module jig.

RJ-142 Soldering jig

RM-208 specific soldering jig.

RM-208

Nokia Customer Care Service Tools and Service Concepts

Page 4 –8 COMPANY CONFIDENTIAL Issue 1