User Guide

WLAN functionality test using SB-7 and Phoenix

Steps

1. Place the phone on the SB-7 WLAN test box, see figure below.

2. Start

Phoenix

service software and turn the phone to the local mode.

3. 3. From the Testing menu, choose WLAN Configuration, the following window should come up:

4. Turn the Power state: On and press Scan.

5. After few seconds, list of found WLAN networks should be updated. If WLAN is working, and at least a

station with SSID name default, should be found.

RM-208

RF Troubleshooting and Manual Tuning Guide Nokia Customer Care

Issue 1 COMPANY CONFIDENTIAL Page 7 –43