User Guide

12. Measure the power levels with a marker and fill them to the table starting from the highest one.

Measured power levels must be monotonously decreasing.

Figure 47 High burst measurement

13. In the

High Burst

pane, click Calculate.

14. Check that the calculated values are within the limits specified in the following table:

Min Max

C0-high -0.5 5

C1-high -50 50

C2-high 400 900

C0-mid -0.7 0.7

C1-mid 0 50

C2-mid 400 900

C0-low -4 4

C1-low -400 440

C2-low -10000 15000

Det-k 100 220

Det-b 0 150

15. To save the coefficients to the phone, click Write.

16. To close the

Tx AGC & Power Detector

window, click Close.

17. Choose Testing→WCDMA→ Tx Control.

RM-208

Nokia Customer Care RF Troubleshooting and Manual Tuning Guide

Page 7 –38 COMPANY CONFIDENTIAL Issue 1