User Guide

2. Choose Tuning→WCDMA→TX AGC And Power Detector Tuning.

3. Click Start.

4. In the

Wide Range

pane, click Tune (the leftmost Tune button).

5. Set up the spectrum analyzer in the following way:

6. After setting the spectrum analyzer, click OK.

7. Measure the power levels with a marker and fill them to the table starting from the highest one. The

lowest power level filled to the table should be at least <-50 dBm. Measured power levels must be

monotonously decreasing.

RM-208

Nokia Customer Care RF Troubleshooting and Manual Tuning Guide

Page 7 –36 COMPANY CONFIDENTIAL Issue 1