User Guide

Figure 44 Tx Control window

Next actions

When settings are done, click “Send” to enable them.

If you change the settings (e.g. give a new channel number), you need to click “Stop” and “Send” again.

Checking antenna functionality

The main antenna has one antenna element: GSM and WCDMA.

In the GSM/WCDMA antenna, there is one Feed and two GND contacts.

Figure 45 RM-208 antenna

RM-208

Nokia Customer Care RF Troubleshooting and Manual Tuning Guide

Page 7 –14 COMPANY CONFIDENTIAL Issue 1