User Guide

Figure 35 Bluetooth self tests in

Phoenix

6. To run the test, click Start. When the results are Passed (0), the BT Self Test is accepted.

Bluetooth BER tests in Phoenix

Steps

1. Start

Phoenix

service software.

2. From the File menu, choose Open Product, and then choose the correct type designator from the

Product list.

3. Connect the phone to a docking station in the local mode.

4. Choose Testing→Bluetooth LOCALS .

5. Locate JBT-3’s or SB-6’s serial number (12 digits) found in the type label on the back of BT-box.

6. In the

Bluetooth LOCALS

window, write the 12-digit serial number on the "Counterpart BT Device Address"

line.

This needs to be done only once provided that JBT-3 or SB-6 is not changed.

RM-208

BB Troubleshooting and Manual Tuning Guide Nokia Customer Care

Issue 1 COMPANY CONFIDENTIAL Page 6 –41