User Guide
AV connector
The AV connector consists of single ended mono or stereo audio output and mono audio input.
The handsfree driver in Avilma is meant for the headset.
Table 15 AV interface electrical characteristics
Signal name Function/
Parameter
Min Typ Max Unit Notes
HSMIC HS mic audio
input
- - 1.3 V
pp
V Max. negative level -
0.7 V
HSEARL HS EAR L audio
output
- - 2 V
pp
V SPR requirement
HSEARR HS EAR R audio
output
- - 2 V
pp
V SPR requirement
MICBIAS HS MIC bias
voltage
2.05 2.1 2.25 V
ECI Vin high 1.7 - 2.6 V
ECI Vin low 0 - 0.7 V
Baseband technical specifications
External interfaces
Name of Connection Connector reference
USB X3300 (on engine PWB)
Charger X2000 (on engine PWB)
Headset X2002 (on AV flex)
SIM X2700 (on engine PWB)
Micro SD X3200 (on engine PWB)
Battery connector X2070 (on engine PWB)
SIM IF connections
Pin Signal I/O Engine connection Notes
C1 VSIM Out EM ASIC N2200 VSIM1 Supply voltage
to SIM card,
1.8V or 3.0V.
C2 SIMRST Out EM ASIC N2200 SIM1Rst Reset signal to
SIM card
C3 SIMCLK Out EM ASIC N2200 SIM1ClkC Clock signal to
SIM card
C5 GND - GND Ground
RM-437; RM-449; RM-450
System Module and User Interface
Page 6 –24 COMPANY CONFIDENTIAL Issue 1
Copyright © 2008 Nokia. All rights reserved.










