User Guide

PKD-1 SW security device

SW security device is a piece of hardware enabling the use of the

service software when connected to the parallel (LPT) port of the PC.

Without the device, it is not possible to use the service software.

Printer or any such device can be connected to the PC through the

device if needed.

RF shield box

Because the WCDMA network disturbs the RX side testing of the WCDMA

phone and the Tx signal of the WCDMA phone can severely disturb the

WCDMA network, a shield box is needed in all testing, tuning and fault

finding which requires WCDMA RF signal.

The shield box is not an active device, it contains only passive filtering

components for RF attenuation.

RJ-70 Soldering jig

RJ-70 is a soldering jig used for soldering and as a rework jig for the

engine module.

RM-49

Service Tools and Service Concepts Nokia Customer Care

Issue 1 COMPANY CONFIDENTIAL Page 4 –9