User Guide

Min Typ Max Unit

Low freq -5 -0.7... 4.0 5

High freq -5 -0.7... 4.0 5

i If the Rx gain is acceptable, click Yes to save the results to the phone.

9. To close the

Rx Calibration

window, click Close.

Alternative steps

• From the Operating mode drop-down menu, set mode to Local.

• Choose Tuning→WCDMA→Rx Calibration.

• Click Start.

• Check the Sweep Mode check box and click Tune.

• Setup the signal generator according to the values in the pop-up window:

RM-49

Nokia Customer Care RF Troubleshooting and Manual Tuning Guide

Page 7 –34 COMPANY CONFIDENTIAL Issue 1