User Guide

5. Setup the signal generator to correspond the values in the

RX Calibration

pop-up window and click OK.

6. Set the signal generator to correspond the values in the pop-up window and click OK.

7. Set the signal generator to correspond the values in the pop-up window and click OK.

8. Check that the

Rx chain

value and

Band Response

values are is within the limits presented in the following

table. Click Write.

Min Typ Max Unit

RX chain -6 1.5... 3.5 6 dB

RM-49

RF Troubleshooting and Manual Tuning Guide Nokia Customer Care

Issue 1 COMPANY CONFIDENTIAL Page 7 –33