User Guide

Bluetooth settings for Phoenix

Steps

1. Start

Phoenix

service software.

2. From the File menu, choose Open Product, and then choose the correct type designator from the

Product list.

3. Connect the phone to a docking station in the local mode.

4. From the Testing menu, choose Testing→Bluetooth LOCALS .

5. Locate JBT-3’s or SB-6’s serial number (12 digits) found in the type label on the back of BT-box.

6. In the

Bluetooth LOCALS

window, write the 12-digit serial number on the

Counterpart BT Device Address line.

This needs to be done only once provided that JBT-3 or SB-6 is not changed.

7. Place the BT box near (within 10 – 15 cm) to the BT antenna.

8. To run the tests, click Run BER Test.

Results

When the BER Test Results is below 0.1% (depending on distance) the test is passed.

Figure 53 BER test result

Bluetooth self tests in Phoenix

Steps

1. Start

Phoenix

service software.

2. ChooseFile→Open Product. Then choose the correct type designator from the product list.

RM-49

BB Troubleshooting and Manual Tuning Guide Nokia Customer Care

Issue 1 COMPANY CONFIDENTIAL Page 6 –51