User guide

1 Select Menu > Contacts.
2 Select the contact, or create a new contact.
3 Select Options > Edit.
4 Select Options > Add detail > Share video.
5 Enter the SIP address in the format username@domainname (you can use an IP
address instead of a domain name).
If you do not know the SIP address for the contact, you can use the phone number
of the recipient, including the country code, to share video (if supported by the
network service provider).
UMTS connection settings
To set up your UMTS connection:
• Contact your service provider to establish an agreement for you to use the UMTS
network.
• Ensure that the UMTS access point connection settings for your device are configured
properly. For more information about the settings, contact your service provider.
Share live video or video clips
During an active voice call, select Options > Share video.
1 To share live video during the call, select Live video.
To share a video clip, select Video clip and the clip you want to share.
You may need to convert the video clip into a suitable format to be able to share it.
If your device notifies you that the video clip must be converted, select OK. Your
device must have a video editor for the conversion to work.
2 If the recipient has several SIP addresses or phone numbers including the country
code saved in the contacts list, select the desired address or number. If the SIP
address or phone number of the recipient is not available, enter the address or
number of the recipient including the country code, and select OK to send the
invitation. Your device sends the invitation to the SIP address.
Sharing begins automatically when the recipient accepts the invitation.
Options during video sharing
Zoom the video (available for sender only).
Adjust the brightness (available for sender only).
or Mute or unmute the microphone.
or Turn the loudspeaker on and off.
or Pause and resume video sharing.
Switch to full screen mode (available for receiver only).
Phone 65