User guide

To set the keypad to lock automatically after a defined period, select Phone and SIM
card > Keypad autolock period.
To set a time-out after which the device is automatically locked and can be used only if
the correct lock code is entered, select Phone and SIM card > Phone autolock
period. Enter a number for the time-out in minutes, or select None to set off the
autolock period. When the device is locked, you can still answer incoming calls, and calls
may still be possible to the official emergency number programmed into your device.
To set a new lock code, select Phone and SIM card > Lock code. The preset lock code
is 12345. Enter the current code and then the new code twice. The new code can be
4-255 characters long. Both alphabets and digits can be used, and both uppercase and
lowercase alphabets are possible. The device notifies you if the lock code is not properly
formatted.
Restore original settings
To restore the original device settings, select Menu > Ctrl. panel > Settings and
General > Factory settings. To do this, you need your device lock code. After resetting,
the device may take a longer time to switch on. Documents, contact information,
calendar entries, and files are unaffected.
Positioning settings
Select Menu > Ctrl. panel > Settings and General > Positioning.
To use a specific positioning method to detect the location of your device, select
Positioning methods.
To select a positioning server, select Positioning server.
To select which measurement system you want to use for speeds and distances, select
Notation preferences > Measurement system.
To define in which format the coordinate information is displayed in your device, select
Notation preferences > Coordinate format.
E-mail key settings
Select Menu > Ctrl. panel > Settings and General.
To select which mailbox to open with the e-mail key, select E-mail key settings > E-
mail key, and press the scroll key.
164 Settings