User Guide

WLAN functionality testing using SB-7

Steps

1. Place the phone on the SB-7 WLAN test box, (see figure).

2. Start the phone to the normal mode.

3. Specify AP for the WLAN AP inside the SB-7: go to the Application – Tools – Settings – Connection –

Access points -menu. Select Options and then select New access point and then set the following

information:

a Connection name: default

b Data bearer: Wireless LAN

c WLAN network name: default

d Network status: Public

e WLAN network mode: Infrastructure

f WLAN security mode: Open network

g WLAN security settings: leave it as it is

h Homepage: 192.168.0.51

RM-244

BB Troubleshooting and Manual Tuning Guide

Issue 1 COMPANY CONFIDENTIAL Page 3 –37