User Guide

Note: The phone has two WCDMA bands. The testing and tuning procedures are same for both bands.

Just select band I or V.

Steps

1. Via Phoenix Testing menu, choose WCDMA/RX Control.

2. In the RX control window, make the following settings:

3. Click Start to activate the settings.

If the settings are changed later on (for example, change of channel) you have to click Stop and Start

again.

Note: Clicking Stop also disables TX control if it was active.

4. Set the following RF generator settings:

Figure 22 WCDMA RX generator settings

RM-244

RF troubleshooting

Issue 1 COMPANY CONFIDENTIAL Page 4 –9