User Guide

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL
04.Jul.2006
13
Service Manual E50-1 RM-170 / E50-2 RM-171
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 1.0
MGR
Page
(24)
7. Separate the parts from each other.
8. Remove the KEYMAT from the A-COVER.
9. Undo the screws in the order shown and remove them. For
assembly: Use the same order and a torque of 20 Ncm for
re-assembly.
10. Unlock the UI SHIELD ASSEMBLY with the SS-93.
11. Unlock the second snap of the UI SHIELD.
12. Remove the ENGINE MODULE from the B-COVER.