Nokia Wireless Charging Pillow by Fatboy DT-901 User Guide Issue 1.
About your wireless charger With the Nokia Wireless Charging Pillow by Fatboy DT-901, you can charge your phone or other compatible device without the hassle of untangling charger cables. Just pop your phone on the charging plate, and your phone starts charging. Parts of the product are magnetic. Metallic materials may be attracted to the product. Do not place credit cards or other magnetic storage media near the product, because info stored on them may be erased.
Keys and parts 1 2 3 4 5 Power supply Charger cable Indicator light Power supply connector Charging plate with Fatboy® pillow When the charger is in the pillow, you can't see the indicator light.
Switch the charging plate on or off Use the charging plate only with the supplied power supply. Switch on 1 Connect the charger cable to the power supply. 2 Plug the power supply into a wall outlet. You can keep the plate plugged into to the wall outlet even when you're not charging your phone. The plate uses hardly any power when it's not charging. Switch off Unplug the charger from the wall outlet. Charge your device 1 2 Make sure that there's nothing on the charging plate.
It's normal for the plate and phone to get warm, and they may get even warmer if you use your phone to, for example, stream music while charging. Keep the area around the plate free. If there is something on the plate besides your phone, the phone doesn't charge, and the white indicator light blinks quickly. Remove or replace the Fatboy® pillow Open the fastening on the short end of the pillow, and pull the charging plate out. To clean the pillow, use a moist, clean cloth. Do not wash the pillow.
Continuous light Charging One long blink The battery of your phone is already full Blinking quickly Charging problem If there is a problem with charging: • • Check that no other object is on the plate. Make sure the plate doesn't get too hot. If the plate is too warm, take your phone off the plate, and switch the plate off. The plate may switch off automatically if it is too hot. When the plate has cooled down, try charging again.
• Unauthorised modifications may damage the device and violate regulations governing radio devices. • Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and mechanics. • Only use a soft, clean, dry cloth to clean the surface of the device. Recycle Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way you help prevent uncontrolled waste disposal and promote the recycling of materials.
/Issue 1.
