Cell Phone User Manual

5/10
WLAN ChMinor minor number of the character device
GSM TTYDev name of the GSM serial port
GSM ChMajor major number of the serial port
GSM ChMinor minor number of the serial port
GSM status GSM radio status, possible states are: on, off
WLAN status WLAN radio status, possible states are: off, initialized, on
WLAN state WLAN state, possible values are: disabled, initialized, reset,
hidden scan, scanning, joining, authenticating, associating,
closed, creating BSS, infra, adhoc
WLAN BSSID BSSID of the created or joined network
WLAN SSID SSID of the created or joined network
WLAN Channel radio channel used
WLAN RadioSS radio strength of the current WLAN access point
WLAN Mode current operating mode (infrastructure/ad hoc)
WLAN Known BSSs lists all the BSSs the device driver knows.
The syntax:
ID sequence number
CAP capability information as in the IEEE 802.11 specification. For example, bit0=1
means that the BSS is an infrastructure network and if 0, it is an ad hoc
network.
MAC MAC address of the WLAN access point
CH channel
MX maximum rate (in 500kbit/s intervals)
RSSI radio strength of the WLAN access point (as seen by the radio card)
SSID SSID of the network
5.1 NOKIA_CTL
Nokia_ctl is a simple user interface to control the radio card. Running nokia_ctl without any
arguments will tell the supported commands. Top level commands or command classes are:
enable_wlan Command enables WLAN
disable_wlan Command disables WLAN
wlan_mibset WLAN MIB write commands
wlan_mibget WLAN MIB read commands
profile WLAN profile