User guide

Add access points to an access point
group
Select the group and Options > New
access point.
Copy an existing access point from
another group
Select the group, go to the access point to
copy, and select Options > Organise >
Copy to other dest..
Change the priority of an access point
within a group
Select Options > Organise > Change
priority.
Packet data access point settings
Select Menu > Settings and
Connectivity > Destinations > Access
point, and follow the instructions.
Edit a packet data access point
Select an access point group and access
point marked with
. Follow the
instructions from your service provider.
Select from the following:
Access point name — The access point
name is provided by your service provider.
User name — The user name may be
needed to make a data connection, and is
usually provided by your service provider.
Prompt password — If you must enter
the password every time you log in to a
server, or if you do not want to save your
password in the device, select Yes.
Password — A password may be needed
to make a data connection, and is usually
provided by your service provider.
Authentication — To always send your
password encrypted, select Secure. To
send your password encrypted when
possible, select Normal.
Homepage — Depending on the access
point you are setting up, enter the web
address or the address of the multimedia
message centre.
Use access point — Set the device to
connect to the destination using this
access point after confirmation or
automatically.
Modify advanced packet data access
point settings
Select Options > Advanced settings.
Select from the following:
Network type — Select the internet
protocol type to transfer data to and from
your device. The other settings depend on
the selected network type.
Phone IP address (for IPv4 only) — Enter
the IP address of your device.
DNS addresses — Enter the IP addresses
of the primary and secondary DNS servers,
if required by your service provider. To
obtain these addresses, contact your
internet service provider.
Proxy server address — Enter the
address of the proxy server.
Proxy port number — Enter the port
number of the proxy server.
WLAN internet access points
Select Menu > Settings and
Connectivity > Destinations > Access
point, and follow the instructions.
To edit a wireless LAN (WLAN) access
point, open one of the access point
groups, and select an access point marked
with
.
Connectivity 53
© 2011 Nokia. All rights reserved.