NOKIA C020/C021: USING WITH CARDWIZARD QUICK GUIDE © Nokia Internet Communications Inc. | Filename: C02xQG_cardwizard.pdf | Date: 04.01.
Contents 1. INTRODUCTION ........................................................................................................... 1 2. CLEARING THE HARDWARE PROFILE....................................................................... 1 Legal Notice Copyright © Nokia Internet Communications Inc 1999. All rights reserved. Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Windows is a registered trademark of Microsoft Corporation.
1. INTRODUCTION This quick guide tells you what you should do if you have inserted the Nokia C020 or C021 Wireless LAN Card into a computer running Windows 95 with SystemSoft CardWizard before running the setup program. If you insert the card for the first time before running the setup program, the system detects new hardware and asks for drivers. Even if you cannot find the drivers, the card is not detected as a new card when setup prompts you to insert the card. 2.
Figure 1: The SystemSoft CardWizard application main window. 3. In the program window, select the card you wish to configure, and then select Properties from the View menu. Figure 2: The PC Card Properties dialog box. 4. The PC Card Properties dialog box opens. Select the Drivers tab. © Nokia Internet Communications Inc. | Filename: C02xQG_cardwizard.pdf | Date: 04.01.
Figure 3: The Drivers tab in the PC Card Properties dialog box. 5. Select the Use Plug and Play radio button. Then select the Change Card Driver and Remove from the Plug and Play Hardware List check boxes. 6. Click OK. It may take a while for CardWizard to reset the hardware settings. 7. When CardWizard has finished, remove the card and run the installation program on the CD-ROM. Warning: Do not reinsert the card before you are prompted to do so! © Nokia Internet Communications Inc.
