Nokia Purity Pro Bluetooth Stereo Headset by Monster User Guide Issue 1.
Safety Read these simple guidelines. Not following them may be dangerous or illegal. For further info, read the complete user guide. SWITCH OFF IN RESTRICTED AREAS Switch the device off when mobile phone use is not allowed or when it may cause interference or danger, for example, in aircraft, in hospitals or near medical equipment, fuel, chemicals, or blasting areas. Obey all instructions in restricted areas.
Introduction About your headset The Nokia Purity Pro Bluetooth Stereo Headset by Monster combines superior audio quality with ease of use. Handle calls hands-free, or listen to your favourite tracks. Just unfold the headset, put it on, and you're ready to go. The audio quality doesn't have to suffer in noisy environments - active noise cancellation (ANC) takes out unwanted background noise. The surface of this product is nickel-free. Warning: This product may contain small parts.
This device is compliant with Bluetooth Specification 3.0 supporting the following profiles: A2DP (1.2), HFP (1.6), HSP (1.2) and AVRCP (1.4). Check with the manufacturers of other devices to determine their compatibility with this device. About compatibility You can use your headset with all kinds of devices, but not all devices support all features or connection types.
The keys on the headset use Control Talk® technology. Get started Keys and parts 1 2 3 4 5 6 7 8 9 10 Fast-forward key Multifunction key Rewind key NFC area Battery indicator light Charger connector Microphone Cable connector (3.5 mm) Volume keys Bluetooth key Charge the battery Before using the headset, you must charge the battery. When you unplug a charger, hold and pull the plug, not the cord.
2 When the battery is full and the yellow indicator light turns green, do the following: Tip: You can also charge the headset from your computer with a compatible USB cable. With a wireless connection, the fully charged battery has power for up to 24 hours of talk time or 24 hours music playing time, or up to 7 days of standby time. When the battery charge is low, you hear a periodic voice prompt or beep, and the yellow indicator light flashes.
When the battery is empty, you can still use a wired connection without active noise cancellation (ANC). Tip: The battery indicator light tells you the level of battery charge whenever you switch the headset on or off. A green light means there is enough power. If the light is yellow, you may need to recharge the battery soon. If the light is red, recharge the battery. Switch the headset on There's no power button to press – just unfold the headset, and it automatically switches on.
Wear the headset Adjust the headband for a perfect fit. Put the earpiece marked with L over your left ear and the one marked with R over your right ear. When you put the headset on , the earpiece proximity sensors switch active noise cancellation (ANC) on automatically. If you're not wearing the headset for 10 minutes, ANC switches off, and the headset mutes itself to save power. To carry on using the headset, just put it back on your head.
With some devices, you may need to make the connection separately after pairing. When you switch your headset on, it automatically connects to the device it was used with last. If the last connected device can't be found, the headset connects to the next device on its paired devices list. When the headset is connected to a device, the Bluetooth indicator light flashes slowly. Tip: Can't connect the headset to a compatible device? Make sure the headset is charged, switched on, and paired with the device.
2 3 4 5 6 Switch the compatible device on, and switch Bluetooth on. Switch the headset on. If you've previously paired your headset with another device, press and hold for 2 seconds. The blue indicator light starts to flash quickly. Set your device to search for Bluetooth devices. For details, see your device user guide. On your device, select the headset from the list of found devices. If needed, type in the passcode 0000.
Connect the cable to the headset, and the other end to the headset connector on your device. When you've connected the cable, your headset switches to flight mode. You can only connect the headset to one device at a time. The headset keys work differently when the headset is used with a wired or wireless connection. Not all phone models support a cable connection. For these phones, use the wireless connection.
Redial the last called number When not in a call, press twice. Not available Use voice dialling When not in a call, press and hold When not in a call, press and hold for 2 seconds, and follow the for 2 seconds, and follow the instructions in your phone user instructions in your phone user guide. guide. Some devices may not be fully compatible, and you may need to control your device on the device itself. In some cases, a feature may not be available for your device at all.
Wireless connection Wired connection with a Nokia Lumia phone Wired connection with other phones Play a song Select the song in the music player, and press Select the song in the music player, and press Select the song in the music player, and press Pause or resume a song Press Press Press Play the next song Press Press Play the previous song Press Start the current song from the beginning Press Scroll through the current song quickly Press and hold twice twice Not available Press
When you put your headset on, the earpiece proximity sensors switch ANC on automatically. When you take the headset off, ANC switches off. Settings About the Nokia Accessories app If you have a Nokia Lumia phone, you can keep track of your headset easily. Get the accessories app from Store, and you can manage your headset from your phone. You can use the app to, for example, switch voice prompts on or off.
Switch the voice prompts off Your headset gives you verbal feedback and instructions, for example, when the battery is running low. You can switch these voice prompts off. Make sure the headset is switched on, and you are connected to a device. Press and hold the volume down key and for 2 seconds. You hear a voice prompt, and a red indicator light flashes. Switch the voice prompts back on Press and hold the volume up key and a green indicator light flashes. for 2 seconds.
• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits. If your device gets wet, allow the device to dry. • Do not use or store the device in dusty or dirty areas. Moving parts and electronic components can be damaged. • Do not store the device in high temperatures. High temperatures can shorten the life of the device, and warp or melt plastics. • Do not store the device in cold temperatures.
The aptX software is copyright CSR plc or its group companies. All rights reserved. The aptX mark and the aptX logo are trademarks of CSR plc or one of its group companies and may be registered in one or more jurisdictions. To the maximum extent permitted by applicable law, under no circumstances shall Nokia or any of its licensors be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.
