Nokia Bluetooth Headset BH-804 User Guide 9210506 Issue 1 EN
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this BH-804 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/ EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/. © 2008 Nokia. All rights reserved. Nokia, Nokia Connecting People and the Nokia Original Accessories logo are registered trademarks of Nokia Corporation.
Export controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.
Contents 1. Introduction ......................... 5 3. Basic use ............................. 12 Bluetooth wireless technology........... 5 Place the headset on the ear........... Carry the headset in the strap ........ Calls ........................................................ Adjust the volume............................... Switch a call between headset and mobile device............................... Clear settings or reset........................ 2. Get started ...........................
Introduction 1. Introduction With the Nokia Bluetooth Headset BH-804, you can make and answer calls while on the move. You can use the headset with compatible devices that support Bluetooth wireless technology. Read this user guide carefully before using the headset. Also, read the user guide for your mobile device that you connect to the headset. For more information, see www.nokia.com/support or your local Nokia website. This product may contain small parts. Keep them out of the reach of small children.
Introduction interference from distance and obstructions (shown in light grey) or other electronic devices. The headset is compliant with the Bluetooth Specification 2.0 + EDR supporting the Headset Profile 1.1 and Hands-Free Profile 1.5. Check with the manufacturers of other devices to determine their compatibility with this device.
Get started 2. Get started ■ Keys and parts The headset contains the following parts: 1. Earpiece 2. Indicator light 3. Volume keys 4. Multifunction key 2 1 3 6 4 5 8 5. Earloop holder 6. Earloop 7 7. Microphone 8. Charging contacts Before using the headset, you must charge the battery and pair the headset with a compatible device. Parts of the headset, desk stand, and charger adapter are magnetic. Metallic materials may be attracted to these devices.
Get started Warning: Use only chargers approved by Nokia for use with this particular enhancement. The use of any other types may invalidate any approval or warranty, and may be dangerous. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. ■ Charge the battery Before charging the battery, carefully read “Battery information”, p. 16. 1. Connect the charger to a wall outlet. 2.
Get started The red indicator light is displayed during charging. Charging the battery fully may take up to 1 hour with the AC-6 or DC-6 charger. 3. When the battery is fully charged, the green indicator light is displayed. Remove the headset from the desk stand or remove the adapter. 4. Disconnect the charger from the wall outlet. The battery can also be charged through the USB port of a compatible PC using the Nokia Connectivity Cable CA-101 (sold separately).
Get started headset is not connected to a device within about 30 minutes, it switches off automatically. ■ Pair the headset 1. Ensure that your mobile device is on and the headset is off. 2. To pair the headset if it has not been previously paired with a device, switch on the headset. The headset enters the pairing mode, and the blue indicator light starts to flash quickly.
Get started Disconnect the headset To disconnect the headset from your mobile device, switch off the headset, or disconnect it in the Bluetooth menu of the device. You do not need to delete pairing with the headset to disconnect it. Reconnect the headset If you disconnect the headset from your mobile device, you can reconnect the headset to the device without switching the headset off and back on.
Basic use 3. Basic use ■ Place the headset on the ear The headset is provided with an earloop that you can use for a better fit on your ear. To use the headset without the earloop, gently push the earpiece into your ear (1), and point the headset toward your mouth. To use the headset with the earloop, insert the earloop holder into the slot at the base of the earpiece (2), and insert the earloop into the opening on the holder (3).
Basic use 6 To detach the earloop, gently pull it from the headset. ■ Carry the headset in the strap The headset may be provided with a carrying strap. You can use the strap to wear the headset around your neck. To attach the headset to the strap, insert the headset into the catch at the end of the strap. To detach the headset, pull it from the catch. ■ Calls To make a call, use your mobile device in the normal way when the headset is connected to it. The blue indicator light flashes during the call.
Basic use To redial the number you last called (if your mobile device supports this feature with the headset), when no call is in progress, press the multifunction key twice. To activate voice dialling (if your mobile device supports this feature with the headset), when no call is in progress, press and hold the multifunction key for about 2 seconds until the mobile device starts voice dialling, and proceed as described in the user guide of the device.
Basic use ■ Clear settings or reset To clear all the pairing settings from the headset, switch off the headset, and press and hold the multifunction key (for over 8 seconds) until the red, green, and blue indicator lights start to alternate. After the settings are cleared, the headset enters the pairing mode. To reset the headset if it stops functioning, even though it is charged, connect the headset to a charger that is plugged into a wall outlet (see “Charge the battery”, p. 8).
Battery information 4. Battery information This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device. Use of an unapproved charger may present a risk of fire, explosion, leakage, or other hazard.
Battery information amount of time a device is used for calls will affect its standby time. Likewise, the amount of time that the device is turned on and in the standby mode will affect its talk time.
Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely. • Do not use or store the device in dusty, dirty areas.
Care and maintenance Disposal The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available. Do not dispose of these products as unsorted municipal waste.
