User guide

Boost the low frequency sounds
Press the bass key.
Boost the high frequency sounds
Press the treble key.
You can boost both high and low frequency sounds at the same time.
When you are listening to music with bass or treble active, the indicator light of the
respective key blinks.
Settings
Switch the indicator lights off
You can switch the indicator lights off if you do not want them to be shown, for example,
during a call.
When the headset is connected to a device, press and hold
and the volume down
key for 5 seconds. The yellow indicator light flashes once. Some indicator lights may still
be shown, for example, when the battery charge is low.
Switch the lights back on
Press and hold
and the volume up key for 5 seconds. The green indicator light flashes
once.
Clear the pairings
You can clear the paired devices list on your headset.
Switch the headset off, and press and hold
for 9 seconds.
The headset beeps twice, and the red and green indicator lights alternate. After the
settings are cleared, pairing mode is activated.
Troubleshooting
Cannot connect the headset to a compatible device? Make sure that the headset is
charged, switched on, and paired with the device.
Did the headset stop functioning even though it is charged? Plug the charger into a wall
outlet, and while you press and hold
, connect the headset to the charger.
9