User guide

Switch the headset on or off
To switch the headset on, press and hold
for 2 seconds. The headset beeps, and a
green indicator light flashes once. The headset automatically connects to the last
connected device. If you have never paired the headset with a device, or you have
cleared the paired devices list, pairing mode is automatically activated.
To switch the headset off, press and hold
for 4 seconds. The headset beeps, and a
red indicator light flashes once.
If the headset is not connected to a device within 30 minutes, it switches off.
Wear the headset
You can attach the headset to your clothing using the clip.
The headset is provided with different-sized rubber earpiece tips. Select the tips that fit
you best, and push them onto the earpieces, so that the curved side would be inserted
into your ear.
Make sure you insert the earpiece marked with L into your left ear and the one marked
with R into your right ear.
Gently insert the earpieces into your ears, and fit them properly for a good in-ear seal.
Use active noise cancellation (ANC)
Active noise cancellation (ANC) reduces background noise, so you can enjoy high audio
quality also in noisy environments. As you can listen at a lower volume, ANC helps protect
your hearing.
Activate or deactivate ANC
Use the ANC switch.
You can activate ANC even when your headset is switched off, and use your headset as
ear plugs to reduce background noise, for example, when on a plane.
Tip: To save battery power, make sure ANC is not activated when you are not using the
headset.
Pair the device
Pair and connect the headset
You can control which devices are allowed to connect to your headset.
Before using the headset with a compatible device for the first time, you must pair and
connect them.
5