Nokia Bluetooth Stereo Headset BH-505 3 4 5 1 2 8 6 7 Issue 3.
10 11
ENGLISH DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this BH-505 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/. © 2009-2011 Nokia. All rights reserved. Nokia, Nokia Connecting People and the Nokia Original Accessories logo are trademarks or registered trademarks of Nokia Corporation.
ENGLISH Introduction With the Nokia Bluetooth Stereo Headset BH-505, you can make and answer calls hands-free with your compatible mobile device. You can also listen to music from a compatible music player. Read this user guide carefully before using the headset. Also, read the user guide for the device that you connect to the headset. This product may contain small parts. Keep them out of the reach of small children. Note: The surface of this device does not contain nickel in the platings.
ENGLISH Get started The headset contains the following parts shown on the title page: indicator light (1), cover of the charger connector (2), power key (3), answer/end key (4), earplugs (5), volume key (6), rewind/fast-forward key (7), microphone (8), and play/ pause key (9). Before using the headset, you must charge the battery and pair the headset with a compatible device. Parts of the device are magnetic. Metallic materials may be attracted to the device.
ENGLISH 3. When the battery is fully charged, the green indicator light is displayed. Disconnect the charger from the headset, then from the wall outlet. Press the cover on the charger connector. The fully charged battery has power for up to 12 hours of talk time, up to 375 hours of standby time, or up to 10 hours of music playing time. To check the battery charge when the headset is not connected to a charger, press the power key when the headset is connected to a mobile device.
ENGLISH Pair and connect the headset Before using the headset, you must pair and connect it to a compatible device. If your mobile device supports the A2DP Bluetooth profile and has a music player feature, you can use the device to also play music through the headset. If your mobile device does not support the A2DP profile, you can separately pair the headset with the mobile device and a music player that supports this profile.
ENGLISH 3. Within about 3 minutes, activate the Bluetooth feature on your device, and set it to search for Bluetooth devices. For details, see the user guide of your device. 4. Select the headset from the list of found devices. 5. If necessary, enter the passcode 0000 to pair and connect the headset to your device. If your device does not have a keypad, it may use this passcode by default. In some devices, you may need to make the connection separately after pairing.
ENGLISH Basic use Change the earplugs Warning: When you use the headset, your ability to hear The headset may be provided with outside sounds may be different sized earplugs and earpads. affected. Do not use the Select the earplugs or earpads that fit headset where it can the best and are the most comfortable endanger your safety. for your ears.
ENGLISH To redial the number you last called (if your mobile device supports this feature with the headset), when no call is in progress, press the answer/ end key twice. To activate voice dialling (if your mobile device supports this feature with the headset), when no call is in progress, press and hold the answer/ end key for about 2 seconds. Proceed as described in the user guide of the mobile device. To answer or end a call, press the answer/end key. To reject a call, press this key twice.
ENGLISH To select the next song during playback, slide the rewind/fastforward key up. To select the previous song, slide this key down twice. To scroll through the current song quickly, slide and hold the key. Clear settings or reset To clear the volume and pairing settings from the headset, press and hold the power key and the answer/ end key (for about 5 seconds) until the red and green indicator lights start to alternate. After the settings are cleared, the headset enters pairing mode.
ENGLISH If a battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger, then disconnect and reconnect it to begin charging the battery. If the battery is completely discharged, it may take several minutes before the charging indicator light is displayed. Unplug the charger from the electrical plug and the device when not in use.
ENGLISH • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely. • Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. • Do not store the device in high or cold temperature. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
ENGLISH The crossed-out wheeled-bin symbol on your product, battery, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies in the European Union. Do not dispose of these products as unsorted municipal waste. For more environmental information, see the product Eco-Declarations at www.nokia.com/environment.
