Nokia Luna (BH-220) User Guide Issue 1.
Introduction About your headset With the Nokia Luna (BH-220) Bluetooth Headset, you can handle calls hands-free, even when you are using two phones at the same time. Remove the headset from the cradle, and it's instantly ready for use. The surface of this product is nickel-free. Warning: This product may contain small parts. Keep them out of the reach of small children. Parts of the product are magnetic. Metallic materials may be attracted to the product.
Get started Keys and parts 8 1 2 3 4 5 6 7 8 Microphone Earpiece Charging indicator light Cradle Charger connector NFC area Bluetooth indicator light Multifunction key Charge the battery Before using the headset, you must charge the battery. Warning: Use only chargers approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. Use of unapproved chargers may present a risk of fire, explosion, or other hazard.
When the battery charge is low, you hear a voice prompt. In addition, a red indicator light flashes and the headset beeps every 5 minutes. If you have deactivated voice prompts, the headset beeps every 5 minutes. Check the battery charge With your headset switched on and connected to your phone, press the multifunction key. A green light indicates a sufficient charge level. If the light is yellow, you may need to recharge the battery soon. If the light is red, recharge the battery.
You can pair your headset with 8 phones, but you can only connect it to a maximum of 2 phones at the same time. With some phones, you may need to make the connection separately after pairing. When the headset is connected to a phone, the Bluetooth indicator light flashes slowly. Pair and connect the headset using NFC With Near Field Communication (NFC), you can pair and connect your headset to your compatible phone easily.
Pair and connect the headset to two phones When you use the headset for the first time, it automatically pairs and connects to your phone. You can also connect your headset to another phone, and manage calls from, for example, both your personal and your work phones at the same time. 1 2 3 4 Make sure Bluetooth is activated on both phones. To switch the headset off, press and hold the multifunction key for 5 seconds.
Handle calls from two phones If your headset is connected to two phones, you can handle calls from both at the same time. End an ongoing call, and answer a call on another phone Press the multifunction key. Put an ongoing call on hold, and answer a call on another phone Press and hold the multifunction key for 2 seconds. Switch between active and held calls Press and hold the multifunction key for 2 seconds. End an ongoing call, and activate a held call Press the multifunction key.
Clear the pairings 1 To switch the headset off, press and hold the multifunction key for 5 seconds. 2 Press and hold the multifunction key for 9 seconds. The headset beeps twice, and the red and green indicator lights alternate. 3 When the headset switches on, pairing mode is activated. Follow the voice prompts. Product and safety information Battery and charger information This device has an internal, nonremovable, rechargeable battery.
• • • • • • Do not store the device in cold temperatures. When the device warms to its normal temperature, moisture can form inside the device and damage electronic circuits. Do not attempt to open the device. Unauthorised modifications may damage the device and violate regulations governing radio devices. Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and mechanics. Only use a soft, clean, dry cloth to clean the surface of the device.
