User guide

Devices do not need to be in direct line-of-sight, but they must be within 10 metres

(33 feet) of each other. The connection may be affected by obstructions such as walls

or other electronic devices.

This device is compliant with Bluetooth Specification 2.1 + EDR supporting the

following profiles: headset profile (1.1) , handsfree profile (1.5). Check with the

manufacturers of other devices to determine their compatibility with this device.

Charge the battery

Before using the headset, you must charge the battery.

Warning:

Use only chargers approved by Nokia for use with this particular model. The use of

any other types may invalidate any approval or warranty, and may be dangerous. Use

of unapproved chargers may present a risk of fire, explosion, or other hazard.

1 Plug the charger into a wall outlet.

2 Connect the charger cable to the charger connector on the headset. The red

indicator light turns green when the battery is fully charged.

3 Disconnect the charger from the headset, then from the wall outlet.

When you unplug a charger, hold and pull the plug, not the cord.