Nokia Bluetooth Headset BH-210 1 2 5 7 4 8 3 6 11 9 10 9204661/2
ENGLISH DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this HS-98W product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/. © 2007 Nokia. All rights reserved.
ENGLISH countries. Diversion contrary to law is prohibited. Introduction The Nokia Bluetooth Headset BH-210 allows you to make and receive calls while on the move. You can use the headset with compatible mobile devices that support Bluetooth wireless technology. Read this user guide carefully before using the headset. Also read the user guide for your mobile device, which provides important safety and maintenance information. Keep the headset out of reach of small children.
ENGLISH Get started The headset contains the following parts shown on the title page: green indicator light (1), multifunction key (2), charger connector (3), earloop (4), earpiece (5), and microphone (6). Before using the headset, you must charge the battery and pair the headset with a compatible mobile device. Warning: Use only chargers approved by Nokia for use with this particular enhancement. The use of any other types may invalidate any approval or warranty and may be dangerous.
ENGLISH If charging does not start, disconnect the charger, plug it in again, and retry. Charging the battery fully may take up to 2 hours. 3. When the battery is fully charged, the indicator light turns off. Disconnect the charger from the headset and the wall outlet. The fully charged battery has power for up to 6 hours of talk-time or up to 150 hours of standby time. However, the times may vary with different compatible Bluetooth devices, usage settings, usage styles, and environments.
ENGLISH need to pair the headset with your phone once. If the pairing is successful, the headset appears in the phone menu where you can view the currently paired Bluetooth devices. When the indicator light flashes twice every 5 seconds, the headset is connected to the mobile device and ready for use. Basic use Place the headset on the ear Call handling To use the headset with the supplied earloop, insert the earloop into the small opening at the back of the headset (9).
ENGLISH To answer or end a call, press the multifunction key. To reject the call, press and hold the multifunction key for about 2 seconds. To adjust the volume, use the volume keys on your mobile device. To switch the call between the headset and a compatible device, press and hold the multifunction key for about 2 seconds. Reset To reset the headset if it stops functioning, although it is charged, plug the headset into a charger. Battery information Your device is powered by a rechargeable battery.
ENGLISH Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely.
ENGLISH All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service. Disposal The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life.
