Nokia Bluetooth Headset BH-112 User Guide Issue 1.
Introduction About your headset With the Nokia Bluetooth BH-112 headset, you can handle calls hands-free, even when you are using two mobile devices at the same time. The surface of this product is nickel-free. Warning: This product may contain small parts. Keep them out of the reach of small children. Parts of the product are magnetic. Metallic materials may be attracted to the product.
Get started Keys and parts 7 1 6 2 5 3 4 1 2 3 4 5 6 7 Charger connector Indicator light Power key Microphone Call key Earpiece Earloop Start using your headset When you switch on your headset for the first time, a voice prompt helps you set up your headset. Voice prompts are not available in all languages. The headset comes with different sized earpads. Select the earpad that fits the best and is the most comfortable for your ear.
Warning: Use only chargers approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. Use of unapproved chargers may present a risk of fire, explosion, or other hazard. 1 2 3 Connect the charger to a wall outlet. Connect the charger cable to the charger connector on the headset. The red indicator light turns green when the battery is fully charged. Disconnect the charger from the headset, then from the wall outlet.
1 2 3 4 5 6 To switch the headset off, press and hold for 2 seconds. Switch on the phone to pair with. If you have never paired the headset with a phone, or you have cleared the phone pairings, switch the headset on. If you have previously paired your headset with another phone, press and hold for 5 seconds. Pairing mode is activated, and a green indicator light starts to flash quickly. Follow the voice prompt.
Make calls Make and receive calls To make and receive calls using your headset, you need to connect it to your phone. Make a call Make a call in the normal way. Answer a call Press . End a call Press . Reject a call twice. Press Switch a call between your headset and phone for 2 seconds. Press and hold You can redial the last called number or use voice dialling, if your phone supports these features with the headset. Redial the last called number When no call is in progress, press twice.
Change the volume Set the desired volume level on your connected mobile device. The selected volume level is saved as the minimum volume level for the device that is currently connected to the headset. Pair and connect the headset to two phones When you use the headset for the first time, it automatically connects to your phone. You can also connect your headset to another phone, and manage calls from, for example, both your personal and your work phone at the same time.
2 3 Press and hold and for 9 seconds. The headset beeps twice, and the red and green indicator lights alternate. When the headset switches on, follow the voice prompt. Pairing mode is activated. Deactivate voice prompts for 2 seconds. 1 To switch the headset off, press and hold 2 Press and hold for 5 seconds. Pairing mode is activated, and a blue indicator light starts to flash quickly. for 5 seconds. You hear a voice prompt, and a yellow indicator 3 Press and hold light flashes once.
When your charger is not in use, unplug it from the electrical plug and the device. Do not leave a fully charged battery connected to a charger, as overcharging may shorten the battery’s lifetime. If left unused, a fully charged battery will lose its charge over time. Always keep the battery between 15°C and 25°C (59°F and 77°F). Extreme temperatures reduce the capacity and lifetime of the battery. A device with a hot or cold battery may not work temporarily.
