Nokia 500 Auto Navigation Getting Started Guide Issue 1 EN
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this PD-14 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/ 5/EC. The product is in conformity with the limits defined in Directive 2004/104/EC (amending Directive 72/245/EEC), Annex I, paragraph 6.5, 6.6, 6.8 and 6.9. A copy of the Declaration of Conformity can be found at http://www.nokia.com/ phones/declaration_of_conformity/.
■ Keys and parts 1 2 3 4 5 9 10 6 7 11 12 8 13 1. Cover of connector for an optional external GPS antenna 2. Power key 3. Cover of stereo audio-out connector 4. Indicator light 5. Touch screen 6. Volume down key 7. Menu key 8. Volume up key 9. Memory card with adapter 10.Memory card slot 11.Main power switch 12.Mini USB port/charger connector 13.Reset key © 2008 Nokia. All rights reserved.
■ First use 1. To switch on the device, slide the main power switch to the right. In daily use, use the standby mode instead of switching the device off. This way the device starts up faster. To set the device to (or to exit) the standby mode, press and hold the power key for about 3 seconds. 2. When you are asked to calibrate the screen, tap and briefly press the displayed crosshair with your finger. Repeat this as the crosshair moves around the screen. 3.
6. When you are asked to download the contacts from your phone to the navigation device, tap Yes if you want to use the contacts saved in your phone with the navigation device. ■ Install the device in a car 2 3 5 4 1 6 Attach the mobile holder to the mounting device using the supplied screw (1), and snap the protection plate into place. To attach the mounting device to the windscreen, carefully push the locking lever toward the cup (2).
■ Basic operation Touch screen To use most features of the device, tap the screen with your finger. Important: Avoid scratching the touch screen. Never use a pen or pencil or other sharp objects to write on the touch screen. Open applications from map screen When you switch on the device, the map screen is displayed. This screen shows the map view of the Navigator application. To show or hide the application menu, press the menu key. To open an application from the menu, tap its icon.
■ Navigator Map When the device has a GPS connection, Navigator shows your current location on a map. Tracking mode When you are not navigating to a destination, Navigator is in the tracking mode. In this mode, the map shows, for example, your GPS position and the number of GPS satellites to which the device is connected. To browse the map, tap it to go to the browsing mode. Navigation mode When you are navigating to a destination, Navigator is in the navigation mode.
To select a location, zoom the map in or out if necessary, and move the map with your finger until the cursor points to the desired location. Tap and the desired option. To return to the tracking mode or the navigation screen, tap . Search for and navigate to a destination You can search for a destination, for example, to navigate to it, to show it on the map, or to save it for later use. To return to the previous screen, tap .
Navigate to a point of interest You can search for a point of interest located near the desired location. To navigate to a point of interest, press the menu key, and tap Navigator > Destination > POI search. The starting point (usually your current location) of the search is shown at the top of the screen. To change the starting point, tap Where? and then Address to enter the address, Favourites to select a previously saved address, or GPS position to set your current location as the starting point.
• General settings — You can select, for example, a voice for navigation instructions (VoiceSkin), the distance unit, and how the device reacts to TMC messages (Automatic, Manual, or Off). • Map settings — You can select, for example, the 2D or 3D view and toggle between the night and day modes. • Route settings — You can select, for example, the desired mode of transportation and define the routing settings, such as allow or avoid motorways.
• To speed dial a phone number, tap Favourites to access the speed dial list. To make a call, tap the desired contact. To assign a new contact, tap . To change a contact, tap . Answer a call To answer an incoming call, tap . To reject the call, tap . To view the map and minimise the in-call options screen during a call, press the menu key. is displayed in the top right corner of the screen. To open the in-call options screen, tap .
