AD-5B_En_1st_tab.
AD-5B_En_1st_tab.fm Page 2 Friday, April 9, 2004 DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product AD-5B is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. Copyright © 2004 Nokia. All rights reserved.
AD-5B_En_1st_tab.fm Page 3 Friday, April 9, 2004 2:57 PM Contents 1. Introduction ....................................................................... 4 2. Getting started................................................................... 6 Overview........................................................................................................... 6 Using the adapter for the first time......................................................... 7 Pairing the device.................................
AD-5B_En_1st_tab.fm Page 4 Friday, April 9, 2004 Introduction 1. Introduction The Nokia Wireless Audio Adapter AD-5B enables the use of headsets with Bluetooth technology with Nokia phones that have a Pop-Port™ connector but do not offer integrated Bluetooth functionality. This gives you more freedom for making and receiving calls while on the move or at the office. Read this user’s guide carefully before using the Nokia Wireless Audio Adapter AD-5B.
AD-5B_En_1st_tab.fm Page 5 Friday, April 9, 2004 2:57 PM The Nokia Wireless Audio Adapter sales package includes the adapter and the user’s guide. Note that the Bluetooth passkey, which you need when using the adapter with the headset, is in the card provided in the headset’s sales package. Keep the passkey in a secure place.
AD-5B_En_1st_tab.fm Page 6 Friday, April 9, 2004 Getting started 2. Getting started ■ Overview The Nokia Wireless Audio Adapter contains the following parts: 1 - Control key: Switches the adapter on and off. The control key also changes modes in the adapter. 2 - Indicator light: Displays the current status of the adapter. See ”Modes of the light indicator” on page 10. Note that you should avoid covering the adapter in order to optimise the Bluetooth connection.
AD-5B_En_1st_tab.fm Page 7 Friday, April 9, 2004 2:57 PM Getting started ■ Using the adapter for the first time English Before you can use the Wireless Audio Adapter, you need to associate, "pair", it with the headset you want to use. The compatible headset must support Bluetooth Specification 1.1. For pairing you need the adapter, a compatible phone, and the headset including its PIN code. You only need to pair each individual headset once.
AD-5B_En_1st_tab.fm Page 8 Friday, April 9, 2004 Getting started Pairing the device Switch on the headset power before you start to pair your headset with the Nokia Wireless Audio Adapter. Make sure no other headsets or other compatible audio devices are active within a 10 metre range. 1. Check the headset user guide to familiarise yourself with how to pair your headset . 2. Attach the adapter to the Pop Port connector of your phone. Wait for the slow red blink.
AD-5B_En_1st_tab.fm Page 9 Friday, April 9, 2004 2:57 PM Getting started The Wireless Audio Adapter and the headset are now ready to be used. Note that all audios, including the call alert tones, are now routed to the headset. 4. If the pairing is unsuccessful, either press the Control key once briefly or detach the adapter from your phone and start the pairing procedure again from step one above. Pairing multiple headsets To pair another headset to the adapter, repeat the procedure above.
AD-5B_En_1st_tab.fm Page 10 Friday, April 9, 2004 2:57 PM Getting started ■ Resetting headsets Reset clears all pairing and user data information. To reset the adapter, press and hold the Control key for 10 seconds. The reset is confirmed with an alternating red and green blink for another 10 seconds. Your headset may accept only a limited number of pairings and may need to be reset to make the pairings. For resetting your headset, refer to the user guide for the headset.
AD-5B_En_1st_tab.fm Page 11 Friday, April 9, 2004 2:57 PM Getting started Fast green blink (on for 0.2 seconds, off for 0.8 seconds) The adapter is either in Inquiry mode, which means that the adapter is searching for a headset with Bluetooth technology. If a headset is found, the adapter switches itself to Pairing mode. If a headset is not found, the adapter returns to Init mode. or in Page mode, which means that it is searching for paired headsets.
AD-5B_En_1st_tab.fm Page 12 Friday, April 9, 2004 2:57 PM Getting started • Alternating red and green blink for 10 seconds (on for 0.5 seconds, off for 0.8 seconds) The adapter is in the Reset mode. When the reset has been successful, the light indicator blinks red. • No indication from the light indicator The adapter is in Power saving mode, which means that it is switched off. When the adapter is switched off, the light indicator blinks once in red for confirmation.
AD-5B_En_1st_tab.fm Page 13 Friday, April 9, 2004 2:57 PM ■ Accidental disconnection of the wireless audio adapter If, during a call, the adapter is accidentally disconnected from the Pop-Port connector or the headset battery runs flat, the call is transferred to the phone and is continued normally. The pairing information stays stored in the permanent memory of the adapter.
AD-5B_En_1st_tab.fm Page 14 Friday, April 9, 2004 2:57 PM Getting started • You should not use the Silent profile in your phone, because then you are not able to hear the ringing tone and you might not notice the call. The Automatic answer does not work when the Silent profile is active. • If you have switched your phone off and you have the adapter attached to it, the adapter switches to Init mode when you connect the charger to the phone.
AD-5B_En_1st_tab.fm Page 15 Friday, April 9, 2004 2:57 PM Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fulfil any warranty obligations and to enjoy this product for many years. • Keep all accessories out of the reach of small children. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits.
AD-5B_En_1st_tab.