User Guide

ManualsBrandsNokia ManualsHome Safety Product9500

Issue 1 09/04 COMPANY CONFIDENTIAL

Nokia Customer Care

4 - Service Tools

Summary of content (16 pages)

PAGE 3
RA-2/3 4 - Service Tools Nokia Customer Care Table of Contents Page No List of Recommended Service Tools ................................................................ 5 New service tools for RA-2/3 ............................................................................. 5 Re-used service tools ........................................................................................ 5 New Service Tools for RA-2/3 ............................................................................
PAGE 5
RA-2/3 Nokia Customer Care 4 - Service Tools List of Recommended Service Tools ■ New service tools for RA-2/3 Type Short description Code DA-14 Docking station adapter for JBV-1.
PAGE 6
RA-2/3 4 - Service Tools Nokia Customer Care Type Short Description Code FLS-4S POS flash prommer for for US incl. ACF-8 power supply 0080543 FPS-8 Flash prommer to be used with SF-14 or JBV-1 plus product specific adapter. Sales pack includes: FPS-8 prommer, FPS-8 SW activation & installation instr., FPS-8 activation sheet, power supply ACF-8, AXS-4 service cable (2x 9 pol. Sub-D), AXP-8 Bi-directional 0080321 FPS-10 Flash prommer to be used with SF-14 or JBV-1 plus product specific adapter.
PAGE 7
RA-2/3 Nokia Customer Care 4 - Service Tools New Service Tools for RA-2/3 Type/ Code Description DA-14 0780366 The DA-14 docking station adapter makes signal connections to the phone. JBV-1 and DA14 are used as one unit. JBV-1 main electric functions are: - adjustable VBATT calibration voltage, current measurement limit voltage ”VCHAR”, current measurement calibration current ”ICHAR”. - adjustable ADC calibration voltage via BTEMP and BSI signal. - BTEMP and BSI calibration resistor.
PAGE 8
RA-2/3 4 - Service Tools Type/ Code MJS-76 0770417 Nokia Customer Care Description Picture This tool is used in LGA type component reworking purposes in central service centers. Parts list RJ-16 0770417 RJ-16 soldering jig is used for soldering and as a rework jig for 1BT engine module. SA-49 SA-49 is a coupler for RF testing. SA-49 is used with DA-14. 0770866 Issue 1 09/04 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
PAGE 9
RA-2/3 Nokia Customer Care Type/ Code SES-3 4 - Service Tools Description Picture SES-3 is a LGA rework stencil. 0770558 ST-26 0780487 Repair stencil Picture not available. ST-28 0780489 Repair stencil Picture not available. ST-29 0780491 Repair stencil Picture not available. RJ-71 0780486 Repair jig Picture not available. RJ-72 0780488 Repair jig Picture not available. RJ-73 0780490 Repair jig Picture not available. 9 COMPANY CONFIDENTIAL Copyright © 2004 Nokia.
PAGE 10
RA-2/3 4 - Service Tools Nokia Customer Care Re-used Service Tools Type/ Code JBV-1 0770298 Description Picture The JBV-1 docking station has been designed for calibration and software update use. In calibration mode, JBV-1 is powered by an external power supply 11-16V DC. In flashing mode, power for the phone can be taken from FPS-8 or external power supply 1116V DC. SF-14 0780368 SF-14 POS flash adapter is used in POS (Point of Sales) environment for software updates.
PAGE 11
RA-2/3 Nokia Customer Care Type/ Code FPS-10 0086189 4 - Service Tools Description The flash prommer FPS-10 is used, for example, with SF-14, DA-14 and JBV-1. Power is supplied to FPS-8 from the universal power supply.
PAGE 12
RA-2/3 4 - Service Tools Type/ Code Nokia Customer Care Description PKD-1 0750018 Software security dongle for service SW ACF-8 0680032 ACF-8 universal power supply is used to power FPS-8. ACF-8 has 6V DC and 2.1A output. ACP-8U 0675196 Charger (for U.S.) Output: 5.3V DC, 500 mA; US Version ACP-8E 0675195 Charger (for Europe) Issue 1 09/04 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
PAGE 13
RA-2/3 Nokia Customer Care Type/ Code 4 - Service Tools Description DAU-9S 0730108 Serial data cable with modular connector. 9 pole Sub-D f <=> 8 pole modular The MBUS cable DAU-9S has a modular connector and is used for example between the PC’s serial port and module jig MJ-19. XCS-4 0730178 Modular cable for e.g. connection between FPS-8 and DA-14. XCS-4 is a shielded (one specially shielded conductor) for flashing and service purposes. FLC-2 0730185 Power supply cable from FPS-8 to SF-14.
PAGE 14
RA-2/3 Nokia Customer Care Type/ Code 4 - Service Tools Description PCS-1 0730012 Power cable to connect e.g. JBV-1 to FPS8. 2 x Banana connectors to 5,5 mm DC plug. XRF-1 0730085 RF cable to connect e.g. module repair jig to RF measurement equipment. SMA to N-Connector ca. 610mm. Attenuation for - GSM850/900: 0.3+-0.1 dB - GSM1800/1900: 0.5+-0.1 dB - WLAN: 0.6+-0.1dB AXS-4 0730090 The AXS-4 D9-D9 service cable is used to connect two 9 pin D connectors e.g. between PC and FPS-8.
PAGE 15
RA-2/3 4 - Service Tools Type/ Code Nokia Customer Care Description CA-5S 0730283 DC cable for a phone to JBV-1 connection, used in EM calibration, for example. AXP-8 073F000 The parallel printer cable connects the parallel connector of the PC and the parallel input of the FPS-8. DKU-2 0730238 Connectivity cable Issue 1 09/04 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
PAGE 16
RA-2/3 Nokia Customer Care Type/ Code 4 - Service Tools Description CA-28DS 0730319 Service data cable SS-34 0780396 Flex opening tool 16 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.