User Guide

RAE-6/RA-4

Nokia Customer Care 3 - Service Software Instructions

98 COMPANY CONFIDENTIAL Issue 1 12/04

To use FLS-4S Flash Dongle you have to follow the user guide inside the sales package.

Please check always for the latest version of flash software, which is available on Nokia Partner

Web Site / Nokia Online.

It is very important to follow this insertion and

removal procedure, otherwise the contact pins of

Flash Adapter will be damaged.

The Flash Adapter is equipped with a movable

part, which is attached to the springs for fitting into

the battery holder.

1.) Remove the

Sealing Plug carefully by using

the dental tool. Do not scratch the test pads.

2.) Insert by starting from Battery Spring side.

(NOT from Battery Connector side) To fix the Flash

Adapter first press the adapter spring and then

connect the test pins with the test pads of the

device.

3.) Now, make sure that the contacts springs are

settled correctly.

4.) When removing the Adapter, first release ten-

sion by pressing as shown in the picture.