User Guide

RAE-6/RA-4
Nokia Customer Care 3 - Service Software Instructions
85 COMPANY CONFIDENTIAL Issue 1 12/04
Copyright © 2004 Nokia. All Rights Reserved.
3. Adjust spectrum analyzer accordingly.
4. Click OK.
5. Set each of the sliders to the desired value.
The order of tuning should be the same as the order of the sliders, that is, the Tx
I DC Offset is tuned first and Phase difference is tuned last.
Use <= , =>, PgUp or PgDn keys.
6. Tune LO leakage to minimum with TXI/TXQ DC Offset control (f0 on spectrum
analyzer screen).