User Guide

RAE-6/RA-4
3 - Service Software Instructions Nokia Customer Care
Issue 1 12/04 COMPANY CONFIDENTIAL 54
Copyright © 2004 Nokia. All Rights Reserved.
6. Set the RF generator to required GSM1900 frequency => OK.
Tuning values and ADC readings are shown.
Table 4: Typical values and limits in (GSM1900) Rx Calibration
If values are within limits, they are saved to the phone after successful tuning of
each band.
7. To end tuning, close the “Rx Calibration” window.
GSM1900 Typical value Low limit High limit
Rssi 0: 66 61 71
Rssi 1: 72 67 77
Rssi 2: 78 73 83
Rssi 3: 84 79 89
Rssi 4: 90 85 95
Rssi 5: 94 89 99
Rssi 6: 100 95 105
Rssi 7: 106 101 111
Rssi 8: 112 107 117
Rssi 9: 118 113 123
Rssi 10: 124 119 129
Rssi 11: 130 125 135
Rssi 12: 136 131 141
Rssi 13: 142 137 147
Rssi 14: 148 143 153