User Guide

RAE-6/RA-4

Nokia Customer Care 3 - Service Software Instructions

49 COMPANY CONFIDENTIAL Issue 1 12/04

Receiver Manual Tuning

■ Rx Channel Select Filter Calibration

• Extra equipment / external RF signal is not needed.

• Must be done before other Rx calibrations.

• Rx channel select filter is tuned only in one band = single calibration for all bands.

To start calibrating:

1. From the Tuning menu, choose “Rx Channel Select Filter Calibration”.

The “Rx Channel Select Filter Calibration” window appears.

2. If you do not want the values to be saved to phone (e.g. testing), uncheck “Save

to Phone”.

“Save to Phone” is checked by default.

3. To start tuning, click Tune.

Tuning values must be 0…31

4. If values shown are within limits, click Stop.