User Guide

Issue 1 12/04 COMPANY CONFIDENTIAL 46
Copyright © 2004 Nokia. All Rights Reserved.
RAE-6/RA-4
3 - Service Software Instructions Nokia Customer Care
Set Loss
Figure 5: Set Loss menu
Set Loss is the component for saving RF-losses (of cables and jigs) to file. These loss values
are needed when you tune the phone with Phoenix (using the Autotune component). When you
measure the losses you have to be very careful, because these values affect directly how well
the phone is tuned.
NOTE! This component is only for Autotune uses.
Figure 6: Loss values
■ Environment
Hardware requirements:
PC with Windows 2000/XP.
Power supply
Product specific module jig
RF-splitter and -cables