User Guide

RAE-6/RA-4

Nokia Customer Care 3 - Service Software Instructions

40 COMPANY CONFIDENTIAL Issue 1 12/04

6. After a successful installation, click “Finish” to complete.

YOU CAN NOW CONNECT THE USB CABLE / JBV-1 TO YOUR COMPUTER.

7. Connect power to JBV-1 (11-16V DC) from external power supply, then con-

nect USB cable between JBV-1 USB connector and PC.

8. Install or update the JBV-1 USB drivers which are delivered with the JBV-1 SW

installation package. They can be found in folder:

C:\Program Files\Nokia\ JBV-1 Firmware Update\JBV-1USB driver

If there is no previously installed JBV-1 firmware update package installed on your

computer, Windows detects the connected USB cable and drivers for the new

HW. Please follow the instructions and allow Windows to search and install the

best drivers available.

If there is a previously installed JBV-1 firmware update package (v 17 or older) on

your computer, please update the JBV-1 USB driver. Please see the readme.txt

file under:

C:\Program Files\Nokia\ JBV-1 Firmware Update\JBV-1USB driver – folder for in-

structions on how to update the JBV-1 USB Driver.

After you have installed or updated the JBV-1 USB driver, the actual JBV-1 SW

update begins.

9. Go to folder C:\Program Files\Nokia\JBV-1 Firmware Update\JBV-1 Firmware

Update.

10. To start the JBV-1 SW update, double click fwup.exe.