User Guide

Infrared
Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser
product.
You can use infrared for sending and receiving files from other infrared devices.
1. Make sure that the infrared ports of the devices face each other. The positioning of the devices is more important than angle
or distance.
2. Press Chr+
.
To end the infrared connection, press Chr+ again.
Modem
You can use the device as a modem together with a compatible computer.
Go to Desk > Tools > Modem.
Before you can use your device as a modem:
• You need the appropriate data communications software on your computer.
• You must subscribe to the appropriate network services from your service provider or Internet service provider.
• You must have the appropriate drivers installed on your computer. You need to install DKU-2 (USB) drivers for cable connection,
and you may need to install or update Bluetooth or infrared drivers.
• It is recommended that you have Nokia Modem Options installed on your computer.
See www.nokia.com and the User's Guide for Nokia PC Suite for details.
To connect the device to a compatible computer using an infrared connection, press Activate. To disconnect, press Disable.
Tip: To use the device as a modem using a Bluetooth or cable connection, you must connect the device to a compatible
computer, and activate the modem from the computer.
Note that you may not be able to use some of the other communication features when the device is used as a modem.
Printing
You can print files to compatible printers in most applications. Before starting to print, make sure that your device is properly
connected to the printer.
To print a file to a compatible printer, press Menu, and select File > Printing > Print.... Check that the settings are correct, and
press Print.
To change the printing settings, press Options.
To preview a file before printing, press Menu, select File > Printing > Print..., and press Preview. To start printing to a compatible
printer, press Print. To modify the document size, margins, headers, footers or pagination, press Page setup.
Setting printing options
To change the file printing options, press Menu and select File > Printing > Print..., and press Options.
On the Connection page, set the following:
• Connection type — Select the method you want to use to connect to the printer.
Tip: You can print using a Bluetooth or infrared connection or different network connections such as GPRS. If you
use a network connection, you need to know the correct protocol Network (LPR) or Network (Raw), the IP address
or name of the printer, the correct printing queue, and a possible user name for the printer.
• Printer — Select the correct printer. If you select Hewlett-Packard, select the printer driver here, and the printer in Desk >
Tools > Control panel > Extras.
On the Document page, set the following:
• Number of copies — Select how many copies you want to print.
Defining page setup
To change the page size and orientation, press Menu, and select File > Printing > Page setup.... Select the Size tab.
To change the page size, scroll to Page size, and select a new size. Note that your printer may not be able to print all of the
different options. The numbers in the Width and Height fields change according to the page size you select.
To define a customized page size, enter the numbers in the Width and Height fields.
C o n n e c t i v i t y
Copyright © 2005 Nokia. All Rights Reserved. 88