User Guide www.nokia.com/latinoamerica Copyright © 2005 Nokia. Todos los derechos reservados.
Nokia 9300 smartphone User Guide 9235049 Issue 2
DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the products RAE-6 and RA-4 are in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from www.nokia.com/phones/declaration_of_conformity/. Copyright © 2005 Nokia. All rights reserved.
Contents For your safety..............................................................................6 ABOUT YOUR DEVICE...................................................................................6 NETWORK SERVICES....................................................................................6 Shared memory..........................................................................................7 Enhancements, batteries, and chargers..............................................7 1.
Contents Creating and modifying chart sheets................................................47 List of functions........................................................................................47 10. Presentations.......................................................................51 Viewing presentations...........................................................................51 Viewing slide shows............................................................................
Contents Using world clock.....................................................................................80 Using Alarm clock....................................................................................80 Alarms and reminders............................................................................80 Cities and countries.................................................................................80 Changing cities...........................................................................
For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
For your safety Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as multimedia messages and Web browser require network support for these technologies.
1. Getting started The Nokia 9300 smartphone offers you various business applications, such as e-mail, office tools, and Web browsing, and flexible and fast network connections with EGPRS (EDGE). Installing the SIM card, battery, and memory card Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.
Getting started Tip: If you have inserted the battery, but the device does not start up, press the power key. Charging the battery 1. Connect the charger to an AC wall outlet. 2. Connect the power cord to the bottom of the device. See Fig Keys and connectors, p.10. The battery indicator bar starts scrolling on both displays. If the battery is totally discharged, it may take a few minutes before the charging indicator is shown. The device can be used while charging. 3.
Getting started • PIN and PIN2 code — The PIN (Personal Identification Number) code protects your SIM card against unauthorized use and is usually supplied with the SIM card. The PIN2 code may be supplied with some SIM cards, and is required to access some functions, such as fixed dialing. After three consecutive incorrect PIN code entries, the PIN code is blocked, and you must unblock it with a PUK (Personal Unblocking Key) code before you can use the SIM card again.
Getting started The graphic shows the location of the infrared port. Communicator interface Communicator keyboard 1 — Application buttons. Each button starts the corresponding application, except My own key, which you can configure to open any application. Press Ctrl+My own key to select the application you want the My own key to open. Note that you can open these applications from Desk, too. 2 — Character key. Opens a character table where you can select special characters.
Getting started 5 — Application. To open an application from Desk, select the application, and press Open or the enter key. 6 — Indicator area. The indicator area shows application and system-related information. Multipage dialog 1 — Dialog pages. You can move from one page to another by pressing the menu key. 2 — Selection list. You can view different options in a selection list, and select one of them. 3 — Command buttons.
Getting started To send a file, press Menu, and select File > Send. You can send a file as an e-mail, fax, short message, or multimedia message; or send them using infrared or Bluetooth. To add a shortcut, press Menu, and select File > Add to Desk. Scroll to the group to which you want to add the shortcut, and press Select. After you have selected the group, press OK. For example, you can add shortcuts to files or Web pages. To print to a compatible printer, press Menu, and select File > Printing.
Getting started Keypad lock (Keyguard) When the keyguard is on, calls still may be possible to the official emergency number programmed into your device. Key in the emergency number and press . Use the keypad lock (keyguard) to prevent the keys on the cover phone from being accidentally pressed. To lock the keypad, press the center of the scroll key and . To lock the system, press the center of the scroll key and and unlock the system. .
Getting started Nokia support Check www.nokia.com or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product. For Nokia 9300 information, repairs, or technical support, call 1-800-469-9290 between 8:00 a.m. and 12:00 a.m. (EST) Monday through Friday, and between 10:00 a.m. and 7:00 p.m. (EST) on Saturday and Sunday.
2. Cover phone With the cover phone, you can, for example, make and receive calls, and change profiles. Most of these features are also available in the communicator interface. Cover phone display, standby mode For more advanced tasks, use the communicator interface which you can access by opening the cover. If you open the cover during a call, the loudspeaker is activated. You can also use the applications during a call.
Cover phone • Transfer calls — Allows you to connect the held call to the active call and disconnect yourself from the call (network service). Writing text You can key in text, for example, when you write a text message. Press a number key repeatedly until the desired character appears. If the next letter is located on the same key as the present one, wait until the cursor is shown (or press the scroll key left, right, up, or down to end the time-out period), and key in the letter.
Cover phone When sending messages, your device may display the words Message sent. This is an indication that the message has been sent by your device to the message centre number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider. To write a text message, select Write message, and write the message.
Cover phone To delete contacts and all the numbers attached to them, in standby mode, press Menu, and select Contacts > Delete. Select One by one or Delete all. To delete a single number added to a name, in standby mode, scroll down to the desired name, and press Details. Scroll to the number that you want to delete, press Options, and select Delete number. To edit a name or number, in standby mode, scroll down to the desired name, and press Details. Press Options, and select Edit name or Edit number.
Cover phone • Line for outgoing calls (network service) — select the phone line 1 or 2 for making calls. If you select Line 2 and have not subscribed to this network service, you are not be able to make calls. However, calls on both lines can be answered regardless of the selected line. For example, you can have a private and a business line. You can also prevent the line selection, if supported by your SIM card. Tip: In standby mode, you can switch between the phone lines by pressing and holding .
3. Desk Desk is a starting point from which you can open all applications in the device or on a memory card. Use the joystick or arrow keys to move up and down on the screen. Desk shows all applications that are installed in your device. When you install new applications, they are shown on Desk as well. Most applications are grouped in default groups, which are Personal, Office, Media, and Tools.
4. Telephone In Telephone, you can view the contacts you have stored in the telephone directory, SIM card, or memory card. You can also make phone calls, view recent calls, contact voice mailboxes, and define call settings. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.
Telephone Viewing dialed, received, and missed calls You can view calls that you have recently dialed, received, or missed. The phone saves missed and received calls only if the network supports these functions and if the phone is switched on and within the network service area. Press Recent calls, and select Dialed calls, Received calls, or Missed calls. To move from one dialog page to another, press Menu. You can also view call information in the Log. See "Log," p.25.
Telephone Call restriction You can restrict incoming or outgoing calls, and international calls (network service). When calls are restricted, calls still may be possible to the official emergency number programmed into your device. To restrict voice calls, go to Telephone, and select Settings > Voice call restriction.
Telephone To change the phone line for outgoing calls (network service), scroll to Telephone line in use, press Change, and select the phone line. To be able to use this function, you need a SIM card that supports the alternate line service and a subscription to two phone lines. To prevent the phone line selection, scroll to Block line selection, press Change, and select Yes.
5. Messaging In Messaging, you can create, send, receive, view, edit, and organize text messages, multimedia messages, e-mail messages, fax messages, and special text messages containing data, such as settings or bookmarks of Web pages. You can also receive messages and data using Bluetooth or Infrared, receive service messages, cell broadcast messages, and send service commands.
Messaging Managing messages To create a new folder for messages, press Menu, and select File > New folder.... Enter a Folder name, select where the folder should be created, and press Create. Note that you cannot create subfolders in Inbox, Outbox, or Sent folders, except in IMAP4 remote Outbox, and Sent folders when online. IMAP 4 is a standard protocol for accessing e-mail on your remote server. With IMAP4, you can conduct searches, create, delete and manage messages and folders on the server.
Messaging To use another connection, scroll to the connection you want to use, and press Change. To go online after selecting a new connection, press Connect. Writing and sending e-mail Press Write message, select E-mail, and press OK. To write new e-mail, press Recipient. Select the recipient of the message from the Contacts directory, and press To. Enter a subject and the message, and press Send. You can also enter the recipient's e-mail address in the To: field.
Messaging Retrieving e-mail E-mail addressed to you is not automatically received by your device, but by your remote mailbox. To read your e-mail, you must first connect to the remote mailbox and then select the e-mails you wish to retrieve into your device. Connection to a remote mailbox is established using data call, GPRS, or IP passthrough. See "Connectivity," p.86.
Messaging You need to define settings only for e-mail accounts. Define the following on the General page: • E-mail account name — Enter a descriptive name for the connection. Note that the maximum length of the name is 25 characters. • My name — Enter your name. • Username — Enter your user name, given to you by your service provider. • Password — Enter your password. If you leave this field blank, you will be prompted for a password when you try to connect to your mailbox.
Messaging • IMAP4 folder path — Enter the path to the IMAP4 inbox location in case the server cannot open it automatically. Normally you do not need to define the path. To edit an existing account, select the account type that you want to edit, and press Edit. Text messages Your device supports the sending of text messages beyond the normal 160-character limit. If your message exceeds 160 characters, it will be sent as a series of two or more messages.
Messaging Tip: If the text message that you received contains a hyperlink, select the hyperlink, and press Open Web address to open the browser. If the text message that you received contains a number, place the cursor on the number, and press Call number to call the number. Text message settings To define general sending options for text messages, press Menu, and select Tools > Account settings.... Select Text message, and press Edit. To move from one dialog page to another, press the Menu key.
Messaging Multimedia messages Note: Only devices that offer compatible multimedia message or e-mail features can receive and display multimedia messages. The appearance of a multimedia message may vary depending on the receiving device. The default setting of the multimedia message service is generally on. Creating and sending multimedia messages A multimedia message can contain text, images, or sound or video clips.
Messaging Receiving multimedia messages Important: Multimedia message objects may contain viruses or otherwise be harmful to your device or PC. Do not open any attachment if you are not sure of the trustworthiness of the sender. Multimedia messages are received in your Inbox, and you can open or reply to them as to other messages. You can receive multimedia messages containing objects unsupported by your device, but you cannot view them.
Messaging Saving a received fax In the Range selection dialog, you can select the section of the fax you want to export to another picture file format. To save a multipage fax, open the fax, press Menu, and select File > Export.... Select Whole document to save the fax as a whole, Current page to save the page you are on, Selected to save a section that you selected, or User defined: to enter the page numbers of the pages you want to save.
Messaging Tip: An e-mail notification is a message containing information on the number of new e-mail messages in your mailbox. Opening password-protected messages To view a message that is protected with a password, select the message, and press Open. Enter the correct password, and press OK. The password is usually supplied by the creator of the message, for example, the operator. Viewing bookmark messages To view a message that contains a bookmark, select the message, and press Open.
6. Web Web is an HTML/XHTML browser that allows you to connect to the Internet using GPRS or EDGE. The browser supports different plug-ins, such as Flash 5 and audio plug-ins. To connect to the World Wide Web: • You must configure the Internet access point and Internet connection settings. See "Internet setup," p.72. • If you are using a data call or a GPRS connection, your wireless network must support data calls or GPRS, and the data service must be activated for your SIM card.
Web Opening visited pages To view a list of Web pages and Web addresses that you have visited or tried to visit, press Menu, and select Information > History list. You can scroll the list using the joystick or arrow keys. Note that you may only be able to see the title of the Web page. To clear the history list, press Clear list. Tip: To check the Web address of the page you are viewing, press Open Web address.
Web • Use proxy configuration script — Select whether you want to use a proxy configuration script. If used, it will override proxy settings set for each Internet access point. • Script address — Enter the address for proxy configuration script. Keyboard shortcuts for browsing Here are some useful keyboard shortcuts for browsing. Additional keyboard shortcuts are shown in the menus next to the commands. See "Shortcuts," p.94. • Press Shift+the joystick to open a link in a new window.
7. Contacts You can use the Contacts application to create, edit, and manage all contact information, such as phone numbers and addresses. The main contact database is in the device memory. You can also store contacts in the SIM card and in databases on a memory card inserted in the device. The left frame of the Contacts main view (Contacts directory) shows the contents of the currently open contact database (1). The available contact databases are shown at the top of the list.
Contacts To change the default template for new contact cards, press Menu, select Tools > Settings > General > Default template, press Change, and select the template. To attach an image to the contact card, scroll to the empty image frame, and press Insert picture. To change the image in the contact card, scroll to the image, and press Change picture. To delete the image from the contact card, scroll to the image, and press Remove picture.
Contacts To check the recipient names from the contact database, press Menu, select Tools > Check names. The letters that you have typed in the To: field are matched to the contact database. If only one match is found, it is added to the To: field. If several matches are found, you can select the correct one from a list. Creating and editing contact groups With contact groups you can send the same message to a group of people at the same time.
Contacts To change the display format of the addresses in contact cards, go to Contacts, press Menu, select Tools > Settings > General > Default country/region, and press Change. The address formats are defined according to the standard format used in each country or region. Select the new country or region with the new address format from the list, and press OK.
8. Documents In Documents, you can write new and edit existing text documents. You can insert and view images and other files in the documents. Documents is one of the applications available in the Office group. Office also contains Sheet and Presentations applications, Calculator, and File manager application for file and folder management. To open the Office group, select Desk > Office, and press Open.
Documents To edit or create a new paragraph style, press Style. Select the style you want to edit, and press Edit. Press New to create a new style. Give the new style a name, and specify the font, bullet, border, and spacing properties. To change the paragraph style, move the cursor inside a paragraph, and press Style. Select the new style, and press Set.
9. Sheet In Sheet you can store your data in a file that is called a workbook. Each workbook contains at least one worksheet. A workbook can also contain charts; a chart sheet is a sheet containing a chart that is based on data from a worksheet. Go to Desk > Office > Sheet. Workbooks To create a new workbook, press Menu, and select File > New workbook. To open an existing workbook, press Menu, and select File > Open. Browse for the folder where the file is saved.
Sheet Example: You want to add up the numbers in cells C2 to C6 and have the results appear in cell C7. Select cell C7, and press Insert function. Select the function SUM, press OK, and press Done. Press Point reference, select the cell range C2 to C6 with Shift+joystick, and press OK. The sum appears in cell C7. To name a cell, select the cells you want to name, press Menu, and select Insert > Name > Add. Enter the name for the cell or range of cells.
Sheet COUNTA(value1,value2,...) Counts how many values are in the list of arguments. COUNTBLANK(range) Counts the number of blank cells within a range. DATE(year,month,day) Returns the serial number of a particular date. DATEVALUE(date_text) Converts a date in the form of text to a serial number. DAY(serial_number) Converts a serial number to a day of the month.
Sheet MOD(number,divisor) Returns the remainder from division. MONTH(serial_number) Converts a serial number to a month. N(value) Returns a value converted to a number. NOW( ) Returns the serial number of current date and time. NPV(rate,value1,value2,...) Returns the net present value of an investment based on a series of periodic cash flows and a discount rate.
Sheet TIME(hour,minute, second) Returns the serial number of a particular time. TIMEVALUE(time,text) Converts a time in the form of text to a serial number. TODAY( ) Returns a serial number of the current date. TRIM(text) Removes spaces from text. TRUE( ) Returns the logical value TRUE. TRUNC(number, num_digits) Truncates a number to an integer. TYPE(field) Returns a number which depends on the content of the selected field. UPPER(text) Converts text to uppercase.
10. Presentations In Presentations, you can open, view, edit, and save presentations created with Microsoft PowerPoint 97 or later. You can also create new presentations. Note that not all features and formatting of the original files are supported. Go to Desk > Office > Presentations. Viewing presentations To open an existing presentation, press Menu, and select File > Open..., or press Ctrl+O. Browse for the folder where the file is saved.
Presentations Tip: To move the text field inside the slide, select the text field with the tab key, and scroll with the joystick. To move the text field with smaller steps, press Ctrl+scroll with the joystick. Similarly, you can move other objects, such as pictures or autoshapes. To insert a new slide into a presentation, select the slide after which you want to add the slide, and press Insert slide. Select the layout you want to use in the new slide, and press Insert.
11. Calendar In Calendar, you can create and view scheduled events and appointments. You can also set alarms to calendar entries. Calendar, Month view You can synchronize your calendar data with a compatible computer using PC Suite on the product CD-ROM. For information on synchronization, see the PC Suite guide. You can also synchronize calendar data with compatible phones. See "Data transfer," p.83.
Calendar Untimed entry Managing calendar entries To cross out an entry or mark it as tentative, select the entry, press Menu, and select Entry > Crossed out or Tentative. Crossing out en entry does not remove it from the calendar. To send a calendar entry, press Menu, and select File > Send. Select the method of sending. To add a received calendar entry to your calendar, open the message that contains the calendar entry, and press Add to calendar.
Calendar Week view The Week view shows the events for the selected week in seven day boxes. Today's date is marked with a colored rectangle. Tip: To quickly select a different date in day and week views, press the tab key, select the desired date, and press the enter key. Tip: To change the starting day of the week, select Desk > Tools > Control panel > General > Regional settings. Select the Date page and the First day of the week field. Day view The Day view shows the events for the selected day.
12. Instant messaging Go to Desk > Instant messaging. IM allows you to chat with others on the Internet and is compatible with the following IM services: AIM, ICQ, and Yahoo. If IM is not available from your wireless service provider, it may not appear in the menu of your mobile device. Contact your service provider for more information about signing up for IM services and costs for services.
Instant messaging Viewing offline contacts only Viewing offline IM contacts only - To view a list of your IM contacts that are not currently signed on to the IM service, expand the Offline contacts folder on the left side of the main view. Scroll through the list to see the availability status, offline or blocked, for each contact. Viewing all contacts To view a list of your IM contacts whether they are online or offline, press Menu, and select View > All contacts.
Instant messaging Defining IM reception settings To block IM invitations from all users, press Menu, and Tools > Preferences > Receive page, and change Receive invitations to group conversation to From no one. To accept IM messages from your contacts only, press Menu, selectTools > Preferences and the Receive page, and change Receive messages to From contacts only. Select from the following: • Receive invitations to group chat — to select from a list whether invitations are accepted or blocked.
Instant messaging Results of an IM search To use the results of a search for an IM user or group, scroll through the list of found IM groups that match your search criteria. If the list is long, scroll down past the first page of results, or perform another search to limit the number of results. To join an IM group listed in the search results, select a group name and Join group. To bookmark an IM group listed in the search results, select a group name and Save to Favorites.
Instant messaging the list of search results, select a group name in your Inactive list. You cannot join a group that you already have active. To join a group that is not listed in the left frame, select Join new group. To create a new group, select Create group. Chatting in an IM group To participate in an IM group chat, press Menu, select View > Groups, an IM group, and Join > Open. When you successfully join an IM group chat, the active group chat view is displayed.
Instant messaging Inviting non-contacts to a group chat You may want to invite IM users who are not on your contact list to participate in a group chat. To select an IM user to invite to a group chat, if the IM user is not on your contact list, select Invite friend from an active group chat, view the Invitations list, select Invite other, type a user ID, and select Add. When the list of IM users is complete, select Done to return to the master Invitations list.
Instant messaging • Group membership — to allow access to your IM group. Select Open to invited friends to restrict membership to contacts that you invite. Select Open to all to allow any user in the online community to join the group and to allow users to invite a friend into the group. You may open membership to everyone but later ban individual users from the group. • Group size — to set the maximum group size.
13. File manager In File manager, you can manage the contents and properties of files and folders. Go to Desk > Office > File manager. On the left frame of the File manager view, you can browse and select folders. To expand and collapse folders, scroll right and left with the joystick. On the right frame you can open subfolders and files. To move up one folder level, select , and press Open. To move from one frame to another, press the tab key.
File manager To protect the memory card with a password, press Menu, and select Memory card > Security > Change password.... Enter the current password (if already set); then enter the new password, confirm it, and press OK. The password can be up to 8 characters long. The password is stored in your device and you do not need to enter it again while you use the memory card on the same device. If you use the memory card on another device, you are asked for the password.
14. Control panel In Control panel, you can define and modify various settings of your device. Modifying these settings affects the operation of your device across several applications. Go to Desk > Tools > Control panel. Control panel, main view To open an application in Control panel, select one of the folders in the left frame, then the appropriate item in the right frame. To zoom in on the Control panel view, press Menu, and select View > Zoom in.
Control panel Currency page Define the following: • • • • Currency symbol — Enter the symbol for the used currency. Decimal places — Define the number of decimal figures used in currency numbers. Symbol position — Define the position and spacing of the currency symbol and the number of currency units. Negative value format — Define how a negative amount of currency is expressed. Device language To change the language of the device, select General > Device language.
Control panel You cannot install applications in Application manager. See "Installing applications and software," p.84. When you open Application manager, the Installed software page lists all of the software packages that have been installed, with their name, version number, type, and size. To view the details of an installed software package, select Data management > Application manager, and select the Installed software page. Select an application or a component from the list, and press Details.
Control panel Telephone Go to Desk > Tools > Control panel > Telephone. • • • • • 1-touch dials — See "1-touch dialing," p.22. Voice call forwarding — See "Call forwarding," p.23. Voice call restriction — See "Call restriction," p.24. Voice mailboxes — See "Voice mailbox settings," p.25. Other settings — See "Call, network, and phone line settings," p.24. Profile settings You can adjust and customize the device tones for different events, environments, or caller groups.
Control panel To end the Bluetooth SIM access connection from your smartphone, press Menu, select , press Exit Remote SIM profile, and OK. Data call and fax call diverting (network service) Call diverting allows you to direct your incoming data and fax calls to another phone number. To divert data or fax calls, select Telephone > Data call forwarding or Fax call forwarding. Define the following: • Forward all calls — When activated, all incoming calls are diverted.
Control panel Restore default IAP Your device contains predefined, default Internet access points that are generated automatically when a new SIM card is inserted into your device for the first time. If you delete these access points, you can restore them with the Restore default IAP application. To restore the predefined Internet access points, select Connections > Restore default IAP, and press Yes. Security Go to Desk > Tools > Control panel > Security.
Control panel Changing the restriction password To change the password used for restricting voice, fax, and data calls, select Security > Device security, and select the Call restriction page. Select the Restriction password field, and press Change. Enter the current code, and then the new code twice. The restriction password must be four digits long.
Control panel HP printer selection See "Managing mobile printing settings," p.89. Service command editor Service requests, also known as USSD commands, are messages that you send to your service provider. These may be activation commands for network services. To send a service request to your service provider, select Extras > Service command editor, type the service request, and press Send. Internet setup Go to Desk > Tools > Control panel, and select Connections > Internet setup.
Control panel • Auto retrieve DNS — If you select Yes for the IPv4 protocol, the DNS (domain name server) address is obtained automatically from the server. The respective value for the IPv6 protocol is Well known. DNS is an Internet service that translates domain names such as www.nokia.com into IPv4 addresses like 192.100.124.195, or IPv6 addresses like 3ffe:2650:a640:1c2:341:c39:14.
Control panel Some Internet connections may appear inactive, but they may still be sending and receiving data in the background. These connections may postpone the closing of the connection. Select the Other page, and define the settings. • Ask before connecting — If you select Yes, a dialog appears every time you connect to the Internet, asking you to confirm the connection or to change the Internet access point.
15. Media applications Go to Desk > Media. Images Go to Desk > Media > Images. Images consists of two different views: • In the image browser view you can, for example, organize, delete, and rename images stored in your device or memory card. The images can be displayed either as thumbnails or as a list of file names. • In the image viewer, which opens when you select an image in the image browser view and press Open, you can view, edit, and send individual images.
Media applications To make a copy of an image, select the image, press Menu, and select File > Duplicate. To view images as a list of file names or as thumbnails, press Menu, and select View > Show as > Thumbnails or List. To set an image as wallpaper, select the image, press Menu, and select Tools > Set as wallpaper. Select Desk if you want the image to appear in the Desk view, and select Cover if you want to add the background image to the cover phone display.
Media applications Sending a voice recording You can send a voice recording from your device to another device through infrared or Bluetooth, as its own e-mail message, or in a multimedia message. To send a voice recording to another device with infrared, make sure that infrared is active on the receiving device. Select a voice recording, press Menu, select File > Send, and use the infrared option.
Media applications Sending music You can send music as a message. To send a track, press Menu, and select File > Send. Select a method to send the selected music track to another device. Press Insert. A music track can be sent as a message attachment. To select a folder, press Change folder.... Use the dialog to select a new folder. To cancel insert, press Cancel. The track does not return to the original application, and you may select another track.
16. Calculator In Calculator, you can make calculations, and save the results to the calculator memory for later use. The Desk calculator can be used for basic calculations, and the Scientific calculator for more advanced calculations. Note: This calculator has limited accuracy and is designed for simple calculations. Go to Desk > Office > Calculator. Making calculations To make a calculation, enter the first number of the calculation. Press the tab key, and select a function from the function map.
17. Clock In Clock, you can view the date and time of your home and destination city, and manage clock alarms. Go to Desk > Clock. Using world clock To set the date and time, press Menu, and select Tools > Date and time.... Tip: You can also update date and time automatically (network service). You can select this setting in Control panel. See "Date and time," p.65. To switch between the home and destination city information, press the tab key.
Clock Creating and editing country entries To create new or edit existing countries, select File > New country/region... or Edit > Country/Region details.... Enter the new Country/Region name, select the Dialing code field, and enter the new number. Note that if you are editing an existing country, you can also edit the capital city. Creating and editing city entries To create or edit city entries, select File > New city..., and enter the name of the city.
18. Data and software management Your smartphone offers you several applications for managing your personal data, such as contacts and calendar information and e-mail. Data mover You can use Data mover to move certain data, such as contacts and settings, from your Nokia 9200 series Communicator to your Nokia 9300 with infrared or a memory card. Before you start, make sure that there is enough free memory in your devices or memory card for the move.
Data and software management To restore backup data from the memory card, select a backup, and press Restore. Specify which items you want to restore. If you are restoring data from a full backup, you can select Partial backup, and specify which items you want to restore. Press Start restore. When the restoring is finished, press OK to restart the device.
Data and software management 5. Select whether you want to use the profile you created as a default synchronization profile. If you want to return to the default settings for PC Suite, press Menu, and select Tools > Reset PC Suite profile. To edit an existing profile, select the profile, and press Edit. To set one of the existing synchronization profiles as the default profile, select the profile, press Menu, and select File > Tools > Set as default.
Data and software management Installing Symbian software When you install an update or repair to an application, you must have the original or a full backup to restore the application. To restore the original application, remove the application, and install it again from the original installation file or the backup copy. To install software, search the device memory or memory card for the installation file, select the file, and press the enter key to start the installation.
19. Connectivity There are several different connectivity types you can use with your device. You can use wireless connectivity methods such as Bluetooth or infrared, or a USB (Universal Serial Bus) cable connection for PC Suite or IP passthrough. Cable connection You can connect your device to a compatible PC using a DKU-2 (USB) cable. Connect the cable to the bottom of the device. See Fig Keys and connectors, p.10. You can also connect the cable to the desk stand of the device.
Connectivity There can be only one active Bluetooth connection at a time. 1. Open an application where the item you want to send is stored. For example, to send a photo to another device, open the Images application. 2. Select the item you want to send, press Menu, and select File > Send > Via Bluetooth. 3. If you have searched for Bluetooth devices earlier, a list of the devices that were found previously is shown first. You can see a device icon and the device name.
Connectivity Infrared Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser product. You can use infrared for sending and receiving files from other infrared devices. 1. Make sure that the infrared ports of the devices face each other. The positioning of the devices is more important than angle or distance. 2. Press Chr+ . To end the infrared connection, press Chr+ again.
Connectivity To change the orientation of the printed page, scroll to Orientation. In Portrait, the height is larger than the width. In Landscape, the width is larger than the height. To define the margins of a page, press Menu, and select File > Printing > Page setup.... Select the Margins tab, scroll to each margin field, and enter a number. To see view the new margins , close the Page setup dialog, press Menu, and select File > Printing > Print preview.
Connectivity Creating a new configuration server profile The configuration server profile contains the settings for the remote server. You can create several profiles if you need to access multiple servers. You may receive the configuration server profile settings as a special message from your service provider. 1. If you have no profiles defined, press New, otherwise press Menu, and select File > New. 2.
Connectivity Connection manager In Conn. manager, you can view details on active network connections, and end unused connections. Go to Desk > Tools > Conn. manager. Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth. To view detailed information about network connections, select the connection from the list, and press Details. The type of information shown depends on the network connection type.
20. Personalizing your device There are several ways you can personalize your device. • Covers - You can change the front cover of your device. • Cover selection keys - You can change the functions that are shown above the left and right selection keys. • Desk - You can organize the applications, shortcuts, and notes to groups, and create new folders on Desk. • My own key - You can configure the My own key to open your favorite application.
Personalizing your device To rearrange the functions in the list, press Options, and select Organize. Scroll to the function that you want to move, press Move, and select where you want to move the function. Desk You can arrange the Desk in several ways. You can move applications to different groups from their original groups, create new groups, rename old groups, and modify the icons and names of the applications. You can also change the background image on Desk. See "Desk," p.21.
21. Shortcuts Here are some of the available keyboard shortcuts in your device. Shortcuts can make the use of the applications more efficient. There are several different shortcut combinations that you can use: • Shortcuts with Ctrl+key give you access to the Menu functions. For example, pressing Ctrl+N creates a new window in Web, a new contact card in Contacts or a new message in Messaging. • Additional characters and symbols are most often inserted by the Shift+key combination.
Shortcuts Application-specific shortcuts Desk application Ctrl+P Properties Shift+Ctrl+S Show in groups Ctrl+My own key Configure the My own key Clock Ctrl+B Cancel the alarm Ctrl+E View city details Ctrl+K Alarm settings Ctrl+T Set the date and time Shift+Ctrl+A Alarm clock Shift+Ctrl+E View country or region details Shift+Ctrl+N Add a new city Shift+Ctrl+Q Set the clock type Shift+Ctrl+T Remote city details Shift+Ctrl+W World clock Telephone Ctrl+P View serial number (IMEI) S
Shortcuts Ctrl+Q Properties Ctrl+R Reply Ctrl+T Expand folder contents Ctrl+U Disconnect Ctrl+Y Change the connection Shift+Ctrl+A Retrieve all messages Shift+Ctrl+B Retrieve the selected messages Shift+Ctrl+E Rename the selected folder Shift+Ctrl+F Forward the selected message Shift+Ctrl+N Create a new folder Shift+Ctrl+R Reply to all Shift+Ctrl+S Sent items storage Shift+Ctrl+T Account settings Shift+Ctrl+Z Delete messages locally Chr+Messaging Retrieve mail Calendar Ctrl+A
Shortcuts Shift+Ctrl+D Format borders Shift+Ctrl+F Format the font Shift+Ctrl+G Format the style Shift+Ctrl+J View details of the selected object Shift+Ctrl+K Preferences Shift+Ctrl+N Format line spacing Shift+Ctrl+O Insert an object Shift+Ctrl+Y Format tabs Shift+Ctrl+Z Edit the selected object Sheet Ctrl+H Rename the worksheet Ctrl+M Freeze panes Ctrl+Q View worksheets Ctrl+W Insert a new worksheet Ctrl+Y Insert cells Shift+Ctrl+A Format cell alignment Shift+Ctrl+B Format c
Shortcuts Ctrl+N New file Ctrl+O Collapse view Ctrl+P Properties Ctrl+R Rename the selected object Ctrl+U Move up one level Shift+Ctrl+B Back up to memory card Shift+Ctrl+I Sorting order (the order you have already selected, for example ascending) Shift+Ctrl+K Settings Shift+Ctrl+N Create a new folder Shift+Ctrl+Q Change memory card password Shift+Ctrl+R Restore from memory card Calculator Ctrl+B Subtract Ctrl+F Flip layout Ctrl+I Add Ctrl+R Recall Ctrl+Y Function map Shift+
Shortcuts Shift+Ctrl+O Open a file Shift+Ctrl+R Reload all Shift+Ctrl+S Save frame as...
22. Data transmission This device employs the data transmission capabilities of the GSM network to send multimedia messages, short messages and e-mail, and to establish connections with remote computers, for example. Wireless data connections can be made from most locations where your device operates, but it is recommended that you move the device to a location where the strongest possible wireless signal can be obtained. When the signal is strong, data transmission is efficient.
23. Nokia original enhancements An extensive range of enhancements is available for your device. Select the enhancements that accommodate your specific communication needs.
Battery information Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, buy a new battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.
CARE AND MAINTENANCE Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it. • Do not use or store the device in dusty, dirty areas.
Additional safety information Medical devices Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so.
Additional safety information To make an emergency call: 1. If the device is not on, switch it on. Check for adequate signal strength. Some networks may require that a valid SIM card is properly inserted in the device. 2. Press as many times as needed to clear the display and ready the device for calls. 3. Key in the official emergency number for your present location. Emergency numbers vary by location. 4. Press the key.
Technical information Characteristic Value Feature Specification Weight 167 g with Li-Po 970 mAh battery Size Length: 5.20 in (132 mm) Width: 2.01 in (51 mm) Thickness: 0.83 in (21 mm) Frequency range RAE-6 EGSM 900/1800/1900 Memory 192 MB total in device RA-4 GSM 850/1800/1900 128 MB application 64 MB execution <2 GB MMC and RS-MMC Copyright © 2005 Nokia. All Rights Reserved.
Nokia One-Year Limited Warranty Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free from defects in material and workmanship that result in Product failure during normal usage, according to the following terms and conditions: 1. The limited warranty for the Product extends for ONE (1) year beginning on the date of the purchase of the Product. This one year period is extended by each whole day that the Product is out of your possession for repair under this warranty. 2.
Nokia One-Year Limited Warranty takes more than ten (10) days. Please contact the Customer Service Center at Nokia at the telephone number listed at the end of this warranty if you need a loaner and the repair of the Product has taken or is estimated to take more than ten (10) days.
Patent list 4868846 4945633 4969192 5012208 5016851 5045973 5059131 5127844 5128965 5168982 5173927 5200997 5218270 5229701 5230091 5241583 5267234 5270666 5271056 5289059 5292259 5293139 5307371 5311179 5313661 5317283 5319525 5331638 5350956 5351235 5357222 5361459 5365119 5378935 5396653 5400949 5408504 5410733 5416435 5420552 5428602 5430740 5432473 5437056 5444816 5446364 5450487 5471655 5473284 5479476 5479481 5485635 5487084 5490235 5491718 5493255 5493701 5524288 5534878 5537557 5564074 556582
Appendices Appendix A Message from the CTIA (Cellular Telecommunications & Internet Association) to all users of mobile phones A Guide to Safe and Responsible Wireless Phone Use 1 Safety is the most important call you will ever make. Tens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone.
Appendices that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group: National Institute for Occupational Safety and Health Environmental Protection Agency Federal Communications Commission Occupational Safety and Health Administration National Telecommunications and Information Administration The National Institutes of Health participates in some interagency working group activities, as well.
Index Symbols/Numerics 1-touch dialing A connection methods cable 86 infrared 88 modem 88 connections 27, 69, 91 connectivity types 86 connectors 10 Contacts 18, 40 contact groups 42 contacts list 18 one-touch dialing 19 Control panel 65 cookies 37 copying data 82 countries 81 cover phone 13, 16 currency format 66 cursor options 66 16 access codes 9 access points 72 Alarm clock 80 anniversaries view in Calendar answering a call 16, 22 Application manager 66 applications common actions 12 installing 84 r
Index G margins 89 memory 7, 27 memory card backing up data 64, 82 formatting 64 installing 8 passwords 63 memory status 67 menu functions 17 messages 17, 26, 27 deleting 67 e-mail 27 multimedia messages 33 picture messages 32 special message types 35 text messages 31 Messaging center 26 missed calls 18, 23 modem 88 month view in Calendar 54 moving data 82 multimedia messages 33 Music player 77 muting the ringing tone 22 My contact card 41 My own key 66 general packet radio service See GPRS GPRS 90 GSM d
Index previewing files 88 printing 88 privacy settings 71 private key store 71 product information 71 profiles 19, 68 proxy settings 69, 73 PUK code 9 language 66 message centers 32 multimedia messages 33, 34 network 24 profiles 68 RealPlayer 69 regional 65, 66 remote configuration 89 text messages 31, 32 time and date 65 trust 71 voice mailbox 25 wallpaper 66 Sheet 46 shortcuts 13, 18, 94 signal strength 13, 100 SIM card contacts 42 installing 8 text messages 32 slide master view in Presentations 52 slid
Index writing text Y 17 year schedule view in Calendar 55 Copyright © 2005 Nokia. All Rights Reserved.
