User Guide

Issue 1 12/04 COMPANY CONFIDENTIAL 6
Copyright © 2004 Nokia. All Rights Reserved.
RAE-6/RA-4
5 - Disassembly/Reassembly Instructions Nokia Customer Care
7.) Remove the Keypad. Note the guide
openings on the UI Shield Assy when
assembling the Keypad.
8.) The screws are not reusable.
9.) Unscrew the four, Torx Plus
®
size 6
screws in the shown order. Always use new
screws when re-assembling! For assembly,
reverse the order and use a Torx Plus
®
size
6 driver with a torque setting of 25Ncm.
10.) Open the flap carefully by using the
dental tool.
11.) Remove the SHIELD in shown order. 12.) Remove the Power Key.