User Guide

RAE-6/RA-4
Nokia Customer Care 5 - Disassembly/Reassembly Instructions
11 COMPANY CONFIDENTIAL Issue 1 12/04
Copyright © 2004 Nokia. All Rights Reserved.
Unlock the connector carefully.
Unscrew the Torx Plus
®
size 6 screw.
Turn the Engine Module. Take care of the
RF Gasket.
Remove the flex from the connector care-
fully.
For assembly only!
Place the Engine Module onto the Shield.
Take care of the RF Gasket.
For assembly only!
Always use new screw when re-assembling!
For assembly use a Torx Plus
®
size 6 driver
with a torque setting of 25Ncm.
For assembly only!
Put the flex into the connector carefully by
using the flex assembly tape.
For assembly only!
Lock the connector carefully and remove the
flex assembly tape.