User Guide

PAMS
Technical Documentation
RAE-5
4. User Interfaces
Page 4 – 6
Issue 1 04/02
Figure 1. DL2 module
Main Components
DL2 main components include UL2 PWB with components, PDA display and
CMT display.
Components on the module assembly include the following:
– Four layer, 0.6mm thick PWB (UL2) including:
– PDA LCD CCFL backlight circuit.
– Power circuit for PDA LCD bias voltages.
– Power circuit and LEDs for CMT keypad and CMT display back-
light.
– Antenna clips and ground plane.
– Coaxial cable connector for antenna cable.
– 10–pin and 20–pin flex connectors for PDA display module.